Compression check try number two [message #255151] |
Sat, 12 July 2014 10:15 |
budworks521
Messages: 137 Registered: October 2013 Location: Grand Rapids MI 1974 Pain...
Karma:
|
Senior Member |
|
|
Gentlemen, the folks who helped me last week.... I tried the compression check again and have the following readings: 8-133, 6-135, 4-133, 2-132, 1-138, 3-132, 5-140, 7-133. It took awhile to get that high though. Certainly wasn't fast. Also, my vac gauge readings were 15-20 main port in front of carb jumpy readings (vac leak?), vacuum advance to distributor 0 at idle and steady eddy on dial as you increased the throttle. Got to a max of 20 and steady at a high rpm. Back port 13/14 (air cleaner port) and fairly steady. My timing is set at 13 degrees tdc at a slightly high idle. Any thoughts on jumpy vac readings and compression readings would be greatly appreciated.
1974 Painted Desert
455 upper half rebuild
constant project inexperienced mechanic
Grand Rapids Mi
Always trying to learn
|
|
|