GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » 1973-74 Refer vents (back to the subject)
1973-74 Refer vents [message #254342] Fri, 04 July 2014 10:06 Go to next message
bryant374 is currently offline  bryant374   United States
Messages: 563
Registered: May 2004
Location: Pleasant Valley, NY 12569
Karma: 1
Senior Member
This subject had "drifted" to air horns so, here it is back with some clarifications & comments.

The reason there were no refer vents (roof & side) on the 1973 early 74s was that the GMC Engineer in charge of that responsibility forgot. That Engineer was John Locklin who had much going on at that time and it just plain slipped by. How do I know that, John told me so. You may also note that the preproduction vehicles had vents and the early production MHs had body framing for the vents but they were not installed.

The early refers were primarily 12/120V so this probably caused less of a problem than absorption type would have.

The Dealer Service Technical Bulletin 75-TM-9 (link below) was to be implemented if the customer complained about refer performance.

http://www.gmcmhphotos.com/photos/miscellaneous-bryant-stuff/p55165-1-75-tm-9-service-bul.html

Note the baffles in the design link below. They allow 1" free space between the baffle and coils for air flow. My guess is that many of the baffles are likely missing with the replacement of reefers and contribute to their performance.

http://www.gmcmhphotos.com/photos/miscellaneous-bryant-stuff/p43274-refrigerator-venting.html


Bill Bryant
PO 1976~PB (owned 34 years)
1914 Ford (owned 70 years)
1965 Corvette (owned 39 years)
GMC Motorhome History

[Updated on: Fri, 04 July 2014 10:13]

Report message to a moderator

Re: 1973-74 Refer vents [message #254409 is a reply to message #254342] Fri, 04 July 2014 23:21 Go to previous message
SeanKidd is currently offline  SeanKidd   United States
Messages: 747
Registered: June 2012
Location: Northern Neck Virginia
Karma: 4
Senior Member
Thanks Bill, having just installed an absorption refrigerator, my installation went well, and the additional storage was welcome, and the documentation your provided was extremely helpful. Hope to see you at the next Colonial Travellers rally, either Lancaster or Cape May.


Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers
Previous Topic: Engine cooling. Can't get it right
Next Topic: Low Front Ride Height
Goto Forum:
  


Current Time: Tue Nov 19 12:13:07 CST 2024

Total time taken to generate the page: 0.00796 seconds