GMCforum: GMCnet » [GMCnet] Passenger window

Home » Public Forums » GMCnet » [GMCnet] Passenger window

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Passenger window [message #254329]

Fri, 04 July 2014 04:31

John Brandstetter

Messages: 3
Registered: July 2014

Karma: 0

Junior Member

Does anyone have measurements for passenger sliding window

Someone smashed mine and want to replace w plastic one.

77 23 birch
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Passenger window [message #254331 is a reply to message #254329]

Fri, 04 July 2014 08:46

tphipps

Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL

Karma: 9

Senior Member

John, Since the 23 and 26 have different sets of windows, need to know which passenger side window. Measurements from my 26 would not be correct. However, the 23 ft GMC had two different passenger side window widths. I would try to get a window from the group rather than go with plastic.
Tom, MS II

2012 Phoenix Cruiser model 2552 KA4CSG

Report message to a moderator

Re: [GMCnet] Passenger window [message #254347 is a reply to message #254329]

Fri, 04 July 2014 10:53

powerjon

Messages: 2446
Registered: January 2004

Karma: 5

Senior Member

John,
If you're talking about the small sliding window by the passenger seat it is the same size as the one on the drivers side. Be sure and save the metal seal. You can have safety glass cut and drilled as a replacement.

http://www.kottoautoglass.com
http://www.hotrodhotline.com/md/html/water_jet_glass_cutting.php
http://www.trivalleyautoglass.com/contact_us.cfm

Jim K do you have an extra slider glass piece that could be used as an pattern?

JR Wright
78 Buskirk Stretch
75 Avion
Michigan

On Jul 4, 2014, at 5:31 AM, John Brandstetter wrote:

> Does anyone have measurements for passenger sliding window
>
> Someone smashed mine and want to replace w plastic one.
>
> 77 23 birch
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan

Report message to a moderator

Re: [GMCnet] Passenger window [message #254349 is a reply to message #254329]

Fri, 04 July 2014 11:16

roy1

Messages: 2126
Registered: July 2004
Location: Minden nevada

Karma: 6

Senior Member

The forward side glass for the 26 ft was available from the local auto glass shop a few years ago. The one with the 2 holes in it for the metal handle. This could also work for the stationary glass which I needed but I didn't want the holes so I bought a used one from Jim K.

Roy Keen Minden,NV 76 X Glenbrook

Report message to a moderator

Previous Topic:	[GMCnet] Cockpit side window
Next Topic:	North Carolina Hurricane

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 01 17:11:12 CDT 2024

Total time taken to generate the page: 0.00909 seconds