need brake drum [message #254238] |
Thu, 03 July 2014 08:37 |
scheibejn
Messages: 35 Registered: March 2013 Location: Stillwater, MN
Karma: 0
|
Member |
|
|
I need a brake drum for my 1977 Kingsley 26 - cracked one in attempting to remove for
bearing job and brake inspection. Will use softer hammer from now on. Let me know if you
have one or know anyone that has one.
Jim Scheibe
1977 Kingsley 26' GMC PD(parlor diesel)4106, 93 Volvo, 96 Volvo,
Oak Park Heights MN 55082
On the gorgeous St. Croix River lookin' at WI shore
|
|
|
|
Re: need brake drum [message #254350 is a reply to message #254238] |
Fri, 04 July 2014 11:16 |
lotsofspareparts
Messages: 726 Registered: May 2014 Location: Arlington, WA
Karma: -9
|
Senior Member |
|
|
scheibejn wrote on Thu, 03 July 2014 06:37I need a brake drum for my 1977 Kingsley 26 - cracked one in attempting to remove for
bearing job and brake inspection. Will use softer hammer from now on. Let me know if you
have one or know anyone that has one.
You need to back off the brakes in order to properly remove the drum. Once you back them off it should just fall off once the bearing nut and retainer are removed.
I was offered one from another member when I was looking, didn't crack mine, had a sticky wheel cylinder that wore a groove in the drum.
Jared
Jared & Tina Lazaron + 14yr old Daughter.....
77 Eleganza II "Recherché".....
73 Canyon Lands 230 "Elephant"
|
|
|
Re: need brake drum [message #254577 is a reply to message #254350] |
Sun, 06 July 2014 23:21 |
scheibejn
Messages: 35 Registered: March 2013 Location: Stillwater, MN
Karma: 0
|
Member |
|
|
Quote:scheibejn wrote on Thu, 03 July 2014 06:37
I need a brake drum for my 1977 Kingsley 26 - cracked one in attempting to remove for
bearing job and brake inspection. Will use softer hammer from now on. Let me know if you
have one or know anyone that has one.
You need to back off the brakes in order to properly remove the drum. Once you back them off it should just fall off once the bearing nut and retainer are removed.
I was offered one from another member when I was looking, didn't crack mine, had a sticky wheel cylinder that wore a groove in the drum.
Jared
Thanks - I'm still looking for that drum. In the meantime, I'm getting a new set of tires and trying any source for that drum at a reasonable price. Go the "applied" way if nothing else.
Jim
Jim Scheibe
1977 Kingsley 26' GMC PD(parlor diesel)4106, 93 Volvo, 96 Volvo,
Oak Park Heights MN 55082
On the gorgeous St. Croix River lookin' at WI shore
|
|
|
Re: need brake drum [message #255350 is a reply to message #254238] |
Mon, 14 July 2014 16:20 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
PM sent.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|