GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Holding Tank Repair Question w/photo
Holding Tank Repair Question w/photo [message #253676] Sun, 29 June 2014 17:02 Go to previous message
lotsofspareparts is currently offline  lotsofspareparts   United States
Messages: 726
Registered: May 2014
Location: Arlington, WA
Karma:
Senior Member
I got the tank flushed out, bleached out, flushed out again, dried out, and all of the discharge plumbing removed.

Never really took a close look at the crack until today and am pretty certain it can not be plastic welded in the traditional way.

What I am wondering is if this is something I could possibly repair my self with a heat gun, and a hot glue gun.

I would really like to not have to replace this tank although that would certainly be the best option, and probably will be one day, just not now.

As always, I welcome all comments!!

Jared

http://i287.photobucket.com/albums/ll159/lotsofspareparts/1977%20GMC%20Eleganza/aa83076f-4349-4885-a3af-c243885e3fa6.jpg


Jared & Tina Lazaron + 14yr old Daughter..... 77 Eleganza II "Recherché"..... 73 Canyon Lands 230 "Elephant"
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Registered My GMC Today.....ANTIQUE
Next Topic: Fresh water pump is activated by light switch???
Goto Forum:
  


Current Time: Tue Oct 01 11:40:19 CDT 2024

Total time taken to generate the page: 0.00738 seconds