| 2 Piece Radiator Shroud [message #253452] |
Fri, 27 June 2014 16:37  |
quadracerx1
Messages: 207
Registered: April 2013
Location: Puyallup, Washington
Karma: 1
|
Senior Member |
|
|
So my radiator is out, and new hoses, thermostat, etc. will go back in...
1) Is the two piece shroud a lot better at cooling than the stock setup?
I plan on towing so if it will definitely help Ill spend the $$
2) I have only seen it on Applied GMC any other vendors carry them?
Thanks,
Steve
75 26' GMC Glenbrook
Puyallup, Washington
|
|
|
|
| Re: 2 Piece Radiator Shroud [message #253453 is a reply to message #253452] |
Fri, 27 June 2014 17:08  |
GeorgeRud
Messages: 1380
Registered: February 2007
Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
I don't know how much it will help with cooling, but it does make servicing easier as the original style is rather difficult to remove. I think someone does make these for JimK, but he is probably your closest and easiest source.
George Rudawsky
Chicago, IL
75 Palm Beach
|
|
|
|
| Re: 2 Piece Radiator Shroud [message #253457 is a reply to message #253453] |
Fri, 27 June 2014 17:33 |
tphipps
Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
Two piece shroud covers the entire radiator, so there should be some additional cooling. But, the big thing is the ability to service the cooling system, including front engine accessories mush easier than fighting the OEM shroud.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|
|
|
|
|
|
| Re: 2 Piece Radiator Shroud [message #253493 is a reply to message #253452] |
Fri, 27 June 2014 23:08 |
Bob de Kruyff
Messages: 4260
Registered: January 2004
Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
quadracerx1 wrote on Fri, 27 June 2014 15:37So my radiator is out, and new hoses, thermostat, etc. will go back in...
1) Is the two piece shroud a lot better at cooling than the stock setup?
I plan on towing so if it will definitely help Ill spend the $$
2) I have only seen it on Applied GMC any other vendors carry them?
Thanks,
Steve
You may be able to get a 1978 off a parts coach.
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|
|
|
|
| Re: 2 Piece Radiator Shroud [message #253585 is a reply to message #253580] |
Sat, 28 June 2014 20:44 |
midlf
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
quadracerx1 wrote on Sat, 28 June 2014 20:28Anyone modified their Fan Shroud using the following method:
http://www.gmcws.org/Tech/fan_shroud/fanshroud.htm
Do you think it would work as well as the 2 piece fiberglass shroud?
Thanks...
Steve
Yes I did that mod. I have no idea if it will work as well as the 2 piece as I have never worked with a 2 piece. I have never had to drop mine although I will in the next few days to replace an overly aggressive fan clutch.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
|
| Re: 2 Piece Radiator Shroud [message #253588 is a reply to message #253452] |
Sat, 28 June 2014 20:53 |
 |
WD0AFQ
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
|
Senior Member |
|
|
With the "store bought" two piece you can change the fan clutch from top side, not removing anything.
Dan
3 In Stainless Exhaust Headers
One Ton All Discs/Reaction Arm
355 FD/Quad Bag/Alum Radiator Manny Tran/New eng.
Holley EFI/10 Tire Air Monitoring System
Solarized Coach/Upgraded Windows
Satelite TV/On Demand Hot Water/3Way Refer
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
