GMCforum: GMCnet » We have a floor!

Home » Public Forums » GMCnet » We have a floor!

Show: Today's Messages :: Polls :: Message Navigator

We have a floor! [message #252690]

Thu, 19 June 2014 19:56

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma: 3

Senior Member

Today was a busy day. Movers arrived before 8am to the old house and moved everything to the new place and were done by 3pm.

At the same time concrete floor was being poured in the Murray-mahaul at the new house.

http://www.gmcmhphotos.com/photos/the-murray-gets-a-home/p55026-imgp6304-small.html

Murray will be in his home within the week now!

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

Re: [GMCnet] We have a floor! [message #252697 is a reply to message #252690]

Thu, 19 June 2014 20:28

k2gkk

Messages: 4452
Registered: November 2009

Karma: -8

Senior Member

For ease in parking, I suggest you extend the apron for the "barn" (picture 54708) straight out toward the tree in the foreground (to the right of the uprooted stump). Drive Murray straight in from the street/road and make the 180 degree loop and then back him straight into his new home. Relatively easy in and dead simple leaving.

And no requirement to cut any more trees!

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
~ ~ ~ '76 ex-Palm Beach ~ ~ ~
~~ k2gkk + hotmail dot com ~~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
______________
*[ ]~~~[][ ][|\
*--OO--[]---O-*

> Date: Thu, 19 Jun 2014 18:56:56 -0600
> To: gmclist@temp.gmcnet.org
> From: bruce@perthcomm.com
> Subject: [GMCnet] We have a floor!
>
> Today was a busy day. Movers arrived before 8am to the old house and moved everything to the new place and were done by 3pm.
>
> At the same time concrete floor was being poured in the Murray-mahaul at the new house.
>
> http://www.gmcmhphotos.com/photos/the-murray-gets-a-home/p55026-imgp6304-small.html
>
> Murray will be in his home within the week now!
>
>
>
> --
> Bruce Hislop
> ON Canada
> 77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
> Hubler 1 ton front end
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
> My Staff says I never listen to them, or something like that

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: We have a floor! [message #252779 is a reply to message #252690]

Fri, 20 June 2014 16:56

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma: 3

Senior Member

Mac,
I had thought of that, trouble is what you can't see in the photo. There is a municipal ditch going through there and under the driveway. So to modify it (put in a culvert) would require more hassle and $$$ than I was willing to go through.

Report message to a moderator

Re: [GMCnet] We have a floor! [message #252781 is a reply to message #252779]

Fri, 20 June 2014 17:55

k2gkk

Messages: 4452
Registered: November 2009

Karma: -8

Senior Member

Some things in this world can become so annoying that you wish you had spent the effort and funds to fix them long ago. In the end, you spend at least as much effort and funds and you could have avoided the annoyance from the beginning.

Hope you find a solution soon.

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
~ ~ ~ '76 ex-Palm Beach ~ ~ ~
~~ k2gkk + hotmail dot com ~~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
______________
*[ ]~~~[][ ][|\
*--OO--[]---O-*

> Date: Fri, 20 Jun 2014 15:56:09 -0600
> To: gmclist@temp.gmcnet.org
> From: bruce@perthcomm.com
> Subject: Re: [GMCnet] We have a floor!
>
> Mac,
> I had thought of that, trouble is what you can't see in the photo. There is a municipal ditch going through there and under the driveway. So to
> modify it (put in a culvert) would require more hassle and $$$ than I was willing to go through.
>
> --
> Bruce Hislop
> ON Canada
> 77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
> Hubler 1 ton front end
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	Re: [GMCnet] Removing Cabinets (Jared)
Next Topic:	Reposting The Beast

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 02 22:22:38 CDT 2024

Total time taken to generate the page: 0.01120 seconds