GMCforum: GMCnet » Murray's home, ready for floor to be poured

Home » Public Forums » GMCnet » Murray's home, ready for floor to be poured

Show: Today's Messages :: Polls :: Message Navigator

Murray's home, ready for floor to be poured [message #252409]

Tue, 17 June 2014 21:13

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

Spent the weekend laying the tubing for in-floor heating while the bricklayers bricked the front of the garage.

Inspector was in this morning, in-floor passed the pressure test and all look good so he gave the nod to pour the floor.

Murray should be in his home by the end of the month.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Murray's home, ready for floor to be poured By: RF_Burns on Tue, 17 June 2014 21:13
		Re: Murray's home, ready for floor to be poured By: RF_Burns on Tue, 17 June 2014 21:13
		Re: Murray's home, ready for floor to be poured By: Harry on Tue, 17 June 2014 21:52
		Re: [GMCnet] Murray's home, ready for floor to be poured By: k2gkk on Tue, 17 June 2014 22:10
		Re: Murray's home, ready for floor to be poured By: RF_Burns on Wed, 18 June 2014 05:35
		Re: [GMCnet] Murray's home, ready for floor to be poured By: Kingsley Coach on Wed, 18 June 2014 06:16
		Re: [GMCnet] Murray's home, ready for floor to be poured By: k2gkk on Wed, 18 June 2014 10:00
		Re: [GMCnet] Murray's home, ready for floor to be poured By: djester on Wed, 18 June 2014 10:54
		Re: [GMCnet] Murray's home, ready for floor to be poured By: powerjon on Wed, 18 June 2014 11:09
		Re: Murray's home, ready for floor to be poured By: RF_Burns on Wed, 18 June 2014 12:07
		Re: [GMCnet] Murray's home, ready for floor to be poured By: powerjon on Wed, 18 June 2014 12:43

Previous Topic:	Re: [GMCnet] Thinking it through - My family may be right for one?
Next Topic:	Air compressor electric draw/relay

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Oct 04 15:32:10 CDT 2024

Total time taken to generate the page: 0.00807 seconds