[GMCnet] Onan Bridge Rectifier [message #252012] |
Thu, 12 June 2014 10:47 |
|
Sent this before from the wrong eMail account....
I am looking for someone who might loan/give me the plastic
part (preferably with wires attached) that the bridge
rectifier plugs into on the Onan.
What I want to do is to try and model the part in a 3D cad
program and then change the orientation of the connector
holes to match the new bridge rectifiers.
We would then have a part that could be 3D printed (yes, I
have a small 3D printer) and either directly install or be
used as a plug for a mold and cast the part in hard rubber.
If you have one of these that you would be willing to loan
or give, please let me know.
--
Terry Taylor
1974 Eleganza SE
San Lorenzo, CA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Terry Taylor
'74 ex-Eleganza SE
San Lorenzo, CA
http://www.n6mon.org
http://dldesignstore.com
|
|
|
Re: [GMCnet] Onan Bridge Rectifier [message #252029 is a reply to message #252012] |
Thu, 12 June 2014 16:25 |
Bob de Kruyff
Messages: 4260 Registered: January 2004 Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
n6mon wrote on Thu, 12 June 2014 09:47Sent this before from the wrong eMail account....
I am looking for someone who might loan/give me the plastic
part (preferably with wires attached) that the bridge
rectifier plugs into on the Onan.
What I want to do is to try and model the part in a 3D cad
program and then change the orientation of the connector
holes to match the new bridge rectifiers.
We would then have a part that could be 3D printed (yes, I
have a small 3D printer) and either directly install or be
used as a plug for a mold and cast the part in hard rubber.
If you have one of these that you would be willing to loan
or give, please let me know.
--
Terry Taylor
1974 Eleganza SE
San Lorenzo, CA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
It's a great idea and I may be able to cut one off my semi parted out Onan (assuming I remember to do that) What I did a few years ago is actually easier:
http://www.gmcmhphotos.com/photos/onan/p17103.html
http://www.gmcmhphotos.com/photos/onan/p17103.html
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|
Re: [GMCnet] Onan Bridge Rectifier [message #252031 is a reply to message #252012] |
Thu, 12 June 2014 16:38 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
n6mon wrote on Thu, 12 June 2014 10:47Sent this before from the wrong eMail account....
I am looking for someone who might loan/give me the plastic
part (preferably with wires attached) that the bridge
rectifier plugs into on the Onan.
If you have one of these that you would be willing to loan
or give, please let me know.
--
Terry Taylor
I have one, without the wires, you can have. If you are on the GMCMI membership list I can get your address there or you can PM me with your address.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
Re: [GMCnet] Onan Bridge Rectifier [message #252058 is a reply to message #252031] |
Fri, 13 June 2014 07:08 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
[quote title=midlf wrote on Thu, 12 June 2014 16:38]n6mon wrote on Thu, 12 June 2014 10:47
I have one, without the wires, you can have. If you are on the GMCMI membership list I can get your address there or you can PM me with your address.
Terry - after JimK's offer let me know if you want mine.
FYI - the terminals that go in this block are the same that are used on the common Bosh relay connectors.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|