| Looking for a picture of a cabinet drawer near the door [message #251629] |
Fri, 06 June 2014 09:56  |
werewilfs
Messages: 329
Registered: July 2012
Location: Rappahannock County, VA
Karma: 0
|
Senior Member |
|
|
I have a friend doing some interior work on our coach and I was looking for a picture of a "equipment" drawer near the door under the dinette seats on the right when you open the door. I want to be able to grab equipment, oil etc without having to go into the coach.
Browsed through the picture site but couldn't find exactly what I was thinking about.
Also does anyone have a template to make the curved window frames to hold the blinds in place?
Thanks!
Jared & Stefanie Kohl
Rappahannock County, VA
1973 Painted Desert "Onslow"
|
|
|
|
| Re: Looking for a picture of a cabinet drawer near the door [message #251630 is a reply to message #251629] |
Fri, 06 June 2014 10:06  |
Dennis S
Messages: 3046
Registered: November 2005
Karma: 2
|
Senior Member |
|
|
werewilfs wrote on Fri, 06 June 2014 09:56I have a friend doing some interior work on our coach and I was looking for a picture of a "equipment" drawer near the door under the dinette seats on the right when you open the door. I want to be able to grab equipment, oil etc without having to go into the coach.
Browsed through the picture site but couldn't find exactly what I was thinking about.
Also does anyone have a template to make the curved window frames to hold the blinds in place?
Thanks!
Jared
I suggest you search for tool box on the photo site.
Dennis
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
|
|
| Re: [GMCnet] Looking for a picture of a cabinet drawer near the door [message #251634 is a reply to message #251630] |
Fri, 06 June 2014 10:56 |
Dave Motorhome
Messages: 175
Registered: July 2007
Karma: 2
|
Senior Member |
|
|
I am working on the valences also, I just searched the photo site:
http://www.gmcmhphotos.com/photos/window-valances/p18190.html
also scribed the edge, for my templates.
i want to do:
http://www.gmcmhphotos.com/photos/valances/p4101.html
but...
I also have been looking for the "h mullion" that some used for the
valances, the part listed is from home depot but they no longer sell that
type of window any longer... so they don't carry the h mullion. went by
lowes they had some but it was huge and expensive, 40 buck for a 6 or 8 ft
section,
some one on the list was going to buy the h mullion from an online source
but have not heard how successful his endeavor was.
David Paliotta
75 Glenbrook
Tulsa, OK
http://75glenbrook.googlepages.com/
On Fri, Jun 6, 2014 at 10:06 AM, Dennis Sexton wrote:
> werewilfs wrote on Fri, 06 June 2014 09:56
>> I have a friend doing some interior work on our coach and I was looking
> for a picture of a "equipment" drawer near the door under the dinette
>> seats on the right when you open the door. I want to be able to grab
> equipment, oil etc without having to go into the coach.
>>
>> Browsed through the picture site but couldn't find exactly what I was
> thinking about.
>>
>> Also does anyone have a template to make the curved window frames to
> hold the blinds in place?
>>
>> Thanks!
>
>
> Jared
>
> I suggest you search for tool box on the photo site.
>
>
>
--
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
| Re: Looking for a picture of a cabinet drawer near the door [message #251650 is a reply to message #251646] |
Fri, 06 June 2014 14:07 |
tphipps
Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
Rob Mueller did a bang up job on installed tool drawers in his Avion, Double Trouble. The Avion's have plywood seat platforms, so not difficult at all to work with. P.O. of my Avion cut a door in the top of the seat base, Remove the cushion and get immediate access to the interior of the seat box. The size of the enclosed area is larger than the old style military foot lockers.
If you are near one, IKEA has some great drawer assemblies that could easily be used in the GMC environment.
Tom, MS II
Missing Ikea
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|
|
| Re: Looking for a picture of a cabinet drawer near the door [message #251651 is a reply to message #251650] |
Fri, 06 June 2014 14:11 |
tphipps
Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
I am working on the curved valences at the moment. I just held a heavy gauge piece of cardboard up to the door frame and traced the curve at that point. Cut the cardboard, and you have your template. Test fit it, mine is very close.
I do like the plastic square tubing cut for the sides. Take the curve template, cut the shape into a piece of 2 x 4, heat the plastic with hot air gun, then put the heated plastic between the two halves of the 2 x 4, clamp down until the plastic cools. Should work just fine. This will be my approach.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
