GMCforum: GMCnet » Holley Projection

Home » Public Forums » GMCnet » Holley Projection (New Rig, Get used to the questions.)

Show: Today's Messages :: Polls :: Message Navigator

Holley Projection [message #251362]

Mon, 02 June 2014 22:09

lotsofspareparts

Messages: 726
Registered: May 2014
Location: Arlington, WA

Karma: -9

Senior Member

So this rig also has Holley ProJection.

My question is which system is this so I can download the proper manual for tuning purposes.

Thanks everyone,

Jared

http://i287.photobucket.com/albums/ll159/lotsofspareparts/1977%20GMC%20Eleganza/IMG_20140602_191611_5821.jpg

http://i287.photobucket.com/albums/ll159/lotsofspareparts/1977%20GMC%20Eleganza/IMG_20140602_191621_5911.jpg

Jared & Tina Lazaron + 14yr old Daughter..... 77 Eleganza II "Recherché"..... 73 Canyon Lands 230 "Elephant"

Report message to a moderator

Re: Holley Projection [message #251374 is a reply to message #251362]

Tue, 03 June 2014 00:38

wally

Messages: 643
Registered: August 2004
Location: Omaha Nebraska

Karma: 5

Senior Member

lotsofspareparts wrote on Mon, 02 June 2014 22:09

So this rig also has Holley ProJection.

My question is which system is this so I can download the proper manual for tuning purposes.

Thanks everyone,

Jared

I think that is a first generation projection box. It's analog open loop. Dan Gregg is running one and Walt Halley had one.
HTH

Wally Anderson
Omaha NE
75 Glenbrook

Report message to a moderator

Re: Holley Projection [message #251376 is a reply to message #251374]

Tue, 03 June 2014 05:44

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

wally wrote on Tue, 03 June 2014 00:38

lotsofspareparts wrote on Mon, 02 June 2014 22:09
So this rig also has Holley ProJection.

My question is which system is this so I can download the proper manual for tuning purposes.

Thanks everyone,

Jared

I think that is a first generation projection box. It's analog open loop. Dan Gregg is running one and Walt Halley had one.
HTH

Wally is correct. I also have a spare controller and tbody for mine, as these are old and not produced any longer. Parts are available fro Autozone and Holley. Holley has great customer service. I have called them twice and both times they solved my problem over the phone. Teri and I are traveling today but if you need anything email me and I will help you when I get home. gregg_dan at hotmail.com.
Pretty much trouble free. I replaced one tps and one of my throttle bodies began sucking air somewhere so I just swapped in my spare.
Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: Holley Projection [message #251664 is a reply to message #251362]

Fri, 06 June 2014 20:37

Chris Tyler

Messages: 458
Registered: September 2013
Location: Odessa FL

Karma: 7

Senior Member

I have one of these, 4 bbl ist gen KISS version . I will look and see if I can find the manual.
BTW I HIGHLY recomend a wide band sensor for tuning.

76 Glenbrook

Report message to a moderator

Re: Holley Projection [message #251668 is a reply to message #251362]

Fri, 06 June 2014 21:35

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Mime has the,wide band o2sensor. Very easy tuned.
Dan

Report message to a moderator

Re: Holley Projection [message #251716 is a reply to message #251664]

Sun, 08 June 2014 00:32

lotsofspareparts

Messages: 726
Registered: May 2014
Location: Arlington, WA

Karma: -9

Senior Member

Chris Tyler wrote on Fri, 06 June 2014 18:37

I have one of these, 4 bbl ist gen KISS version . I will look and see if I can find the manual.
BTW I HIGHLY recomend a wide band sensor for tuning.

I would appreciate that, looked for it online with no success.

Jared

Jared & Tina Lazaron + 14yr old Daughter..... 77 Eleganza II "Recherché"..... 73 Canyon Lands 230 "Elephant"

Report message to a moderator

Re: Holley Projection [message #252010 is a reply to message #251716]

Thu, 12 June 2014 08:27

Chris Tyler

Messages: 458
Registered: September 2013
Location: Odessa FL

Karma: 7

Senior Member

Dug through the box this AM. I dont have the install manual, but I do have the one for the closed loop o2 sensor [it was an add on option]
I have a hard time seing the dashpots on yours which I take is a 2 BBL
mine has choke, idle, midrancge and power1 power2
If you are already hooked up and running I can walk you through how I tuned it. Its really very easy if tou have a tach and a vac gauge. But a wide band is ideal.
If you want the manual though, you will prob need to call Holley.

76 Glenbrook

Report message to a moderator

Re: [GMCnet] Holley Projection [message #252017 is a reply to message #252010]

Thu, 12 June 2014 12:54

emerystora

Messages: 4442
Registered: January 2004

Karma: 13

Senior Member

I had installed the Holley Projection 2bbl on my gmc back in 1993. I used it for several years but then replaced it with the computer controlled Howell kit.
I later sold the Projection on ebay for $300 but my manual went with it.

I do have a manual for the 4 bbl version in my files and I can sent a .doc or a .pdf if anyone wants it.

Emery Stora

On Jun 12, 2014, at 7:27 AM, Chris Tyler wrote:

> Dug through the box this AM. I dont have the install manual, but I do have the one for the closed loop o2 sensor [it was an add on option]
> I have a hard time seing the dashpots on yours which I take is a 2 BBL
> mine has choke, idle, midrancge and power1 power2
> If you are already hooked up and running I can walk you through how I tuned it. Its really very easy if tou have a tach and a vac gauge. But a wide
> band is ideal.
> If you want the manual though, you will prob need to call Holley.
> --
> 76 Glenbrook
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: Holley Projection [message #252257 is a reply to message #251362]

Mon, 16 June 2014 03:09

Chris Tyler

Messages: 458
Registered: September 2013
Location: Odessa FL

Karma: 7

Senior Member

Emory, I would greatly appreciate it if you could forward that as I do plan to use mine but on a non GMC. I labeled the connections but 10 years in storage and I can no longer read them.

76 Glenbrook

Report message to a moderator

Previous Topic:	[GMCnet] Interesting comparison. 1 ton to original suspension.
Next Topic:	[GMCnet] GMCMH Advertised Gross Vehicle Weight by Year

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 04:23:00 CDT 2024

Total time taken to generate the page: 0.02179 seconds