GMCforum: GMCnet » Methods to weigh front wheels separately

Home » Public Forums » GMCnet » Methods to weigh front wheels separately (front ride height)

Show: Today's Messages :: Polls :: Message Navigator

Methods to weigh front wheels separately [message #251036]

Fri, 30 May 2014 15:17

Tilerpep

Messages: 404
Registered: June 2013
Location: Raleigh, NC

Karma:

Senior Member

Hi all, with drive train shaping up, turning attention to suspension. I know my front ride height is an inch too low. It is level, meaning both sides are an inch too low, with rear set at correct height with air suspension. Dave Lenzi has been a big help to talk to and recommended that I actually weigh the load on each front wheel to aim for balance as I adjust it. I haven't found a shop around Raleigh that has any capacity to do each side separately. Do you all have recommendations for a place, person, or a club that has done this? There are some folks on the black list that have noted if they have a bearing tool (something I am going to ask for next/soon) but I haven't seen anyone make note of a scale. If appropriate you can respond on the forum, or PM me if that would be better.

Thanks,
Tyler

1975 Glenbrook, 1978 Royale rear bath Raleigh, NC

Report message to a moderator

[Message index]

		Methods to weigh front wheels separately By: Tilerpep on Fri, 30 May 2014 15:17
		Re: Methods to weigh front wheels separately By: Ken Burton on Fri, 30 May 2014 15:22
		Re: Methods to weigh front wheels separately By: Bob de Kruyff on Fri, 30 May 2014 16:06
		Re: Methods to weigh front wheels separately By: Tilerpep on Fri, 30 May 2014 18:20
		Re: Methods to weigh front wheels separately By: Bob de Kruyff on Fri, 30 May 2014 18:34

Previous Topic:	Anyone looking for a complete Caddy 500?
Next Topic:	(OT - well for the moment) New efficient batteries

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Oct 04 23:27:19 CDT 2024

Total time taken to generate the page: 0.00993 seconds