GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » lower door hinge
Re: [GMCnet] lower door hinge [message #246372 is a reply to message #246369] Fri, 04 April 2014 10:14 Go to previous messageGo to previous message
emerystora is currently offline  emerystora   United States
Messages: 4442
Registered: January 2004
Karma:
Senior Member
Ken
I doubt that it's a real English word but I used it because that is what Apple used in the message that I replied to and so I felt that he would know that meant the same as enlongate which I normally would use.

I guess that I could have used the Danish word fortaenge, straekke or vaere, langstrakt but I would not have known whether to use the transitive or intransitive form. :)

Emery Stora

> On Apr 4, 2014, at 9:04 AM, Ken Burton <n9cv@comcast.net> wrote:
>
>
>
> Also removing the bolts one and a time and replacing them with 4" or so all-thread and a nut, will make it easier to replace the striker without loosing the nuts and backing plates. Of course reinstall the correct screws when you are finished.
>
>
> Emery, Is ovalize a real word? My spell checker does not like it, but it sure describes what needed to be done.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Onan - No AC Outpus
Next Topic: On road soon!
Goto Forum:
  


Current Time: Sun Jun 30 18:44:23 CDT 2024

Total time taken to generate the page: 0.00824 seconds