GMCforum: GMCnet » Ken Thoma Bearing Tool

Home » Public Forums » GMCnet » Ken Thoma Bearing Tool (Need instructions or pictures)

Show: Today's Messages :: Polls :: Message Navigator

Ken Thoma Bearing Tool [message #246019]

Tue, 01 April 2014 11:30

gbarrow2

Messages: 765
Registered: February 2004
Location: Lake Almanor, Ca./ Red Bl...

Karma:

Senior Member

I was able to borrow bearing tool locally. Thanks Gary Bovee!
Identified as a Thoma Tool with lotsa misc. parts.

Disassembly is no problem but a description or pictures of the re-assembly tools in action would be helpful.

Checked Gene F's site- didn't find anything.

Please direct me to the info or better yet, just come by and help with the bearing job.

Gene Barrow
Lake Almanor, Ca.
1976 Palm Beach

Report message to a moderator

[Message index]

		Ken Thoma Bearing Tool By: gbarrow2 on Tue, 01 April 2014 11:30
		Re: Ken Thoma Bearing Tool By: roy1 on Tue, 01 April 2014 11:34
		Re: Ken Thoma Bearing Tool By: gbarrow2 on Tue, 01 April 2014 11:52
		Re: Ken Thoma Bearing Tool By: roy1 on Tue, 01 April 2014 12:05
		Re: [GMCnet] Ken Thoma Bearing Tool By: Mr ERFisher on Tue, 01 April 2014 13:01
		Re: [GMCnet] Ken Thoma Bearing Tool By: Mr ERFisher on Tue, 01 April 2014 13:05
		Re: Ken Thoma Bearing Tool By: GMC Cruse on Tue, 01 April 2014 12:24
		Re: Ken Thoma Bearing Tool By: A Hamilto on Tue, 01 April 2014 12:29

Previous Topic:	Frame mounted Battery box
Next Topic:	[GMCnet] Is bench testing an AC compressor an option?

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 03 01:21:42 CDT 2024

Total time taken to generate the page: 0.03057 seconds