| [GMCnet] Have photo of what I did to get steel 16" rims on. Can E-mail photo [message #243747] |
Sun, 16 March 2014 09:51 |
BobDunahugh
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
I didn't remember doing this to get the rims on. That was 11 years ago. Very simple, quick, and safe. Time wise to grind the spot. Less than a minute for each side from what I see that I did. As to the brake pads, and rotor thickness having any effect on this. My rotors had only a few thousands under stock. As I just checked them. And had them just trued up. And according to my coach loge. I put new pads on at the same time the steel rims went on. To put a spacer on, with longer studs to me is way out of the question to do. And isn't needed. I hope to get the rim part number soon from Richard. And on that topic. Where is that part number stamped?Bob Dunahugh 78 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
