GMCforum: GMCnet » steering timing mark

Home » Public Forums » GMCnet » steering timing mark

Show: Today's Messages :: Polls :: Message Navigator

steering timing mark [message #243281]

Thu, 13 March 2014 07:36

skip2

Messages: 544
Registered: September 2011
Location: Winter Haven,FL (center o...

Karma:

Senior Member

Don't intend to rehash a previous discussion that had a lot of capital letters but a timing mark was mentioned on the top of the steering shaft. Is that timing mark just a mark that looks like some one took a chisel and popped the end of the shaft to mark TDC or 12:00, I assume this is critical for the turn signal cancellation mechanism, also does the actual orientation of the u-joints on the lower shafts prove to be critical since it looks like there is about 6 positions the slider part of the shaft could bolted to the upper connector? Thanks for any comments.
Skip Hartline

74 Canyon Lands, FiTech, 3.7 FD LSD, Manny Tranny, Springfield Distributor, 2001 Chevy Tracker Ragtop Towd

Report message to a moderator

[Message index]

		steering timing mark By: skip2 on Thu, 13 March 2014 07:36
		Re: [GMCnet] steering timing mark By: Ken Henderson on Thu, 13 March 2014 08:41
		Re: [GMCnet] steering timing mark By: USAussie on Thu, 13 March 2014 08:50
		Re: [GMCnet] steering timing mark By: Brian Waddell on Thu, 13 March 2014 14:13
		Re: [GMCnet] steering timing mark By: Brian Waddell on Thu, 13 March 2014 14:07
		Re: steering timing mark By: Matt Colie on Thu, 13 March 2014 09:23
		Re: [GMCnet] steering timing mark By: Brian Waddell on Thu, 13 March 2014 14:48
		Re: steering timing mark By: skip2 on Thu, 13 March 2014 09:59

Previous Topic:	converter breather ?
Next Topic:	[GMCnet] Was this Vapor Lock or ?

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Oct 04 11:29:25 CDT 2024

Total time taken to generate the page: 0.01484 seconds