[GMCnet] Macerator outlet hose [message #243250] |
Wed, 12 March 2014 21:50 |
glwgmc
Messages: 1014 Registered: June 2004
Karma: 10
|
Senior Member |
|
|
Waaaaay better than was done on the Clasco..........
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed & hand crafted
in the 1907 former Masonic Temple building
in historic Kerby, OR
http://jerrywork.com
,,,,,,,,,
Jerry,
Here's a photo of how JimB and I installed the macerator under Double Trouble:
http://www.gmcmhphotos.com/photos/g6528-macerator-install.html
The 1" ID macerator tube is clear and I don't have a cap on the end because when I'm done macerating I lift the 1" ID tube starting
at where I comes through the rear cross member and work my way towards the end. I can see through the tube and watch the residual
contents as they travel through the tube. When it is empty I lift it out of the dump hole, give it a bit of a shake and feed it back
into the storage tube along the bottom of the frame.
Does this procedure sound somewhat familiar to any of the guys that read this? ;-)
Regards,
Rob M.
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
Re: [GMCnet] Macerator outlet hose [message #243323 is a reply to message #243250] |
Thu, 13 March 2014 10:44 |
corleyw
Messages: 130 Registered: June 2007 Location: Battle Ground, WA
Karma: 0
|
Senior Member |
|
|
I posted a few pix of my macerator hose storage setup, but these are the first photos I have posted. I probably did it all wrong, but now I need to figure out how to show them here or what the link is to them. HELP!
Corley
'76 Glenbrook
29 other vehicles
|
|
|
|
Re: [GMCnet] Macerator outlet hose [message #243438 is a reply to message #243375] |
Fri, 14 March 2014 08:49 |
corleyw
Messages: 130 Registered: June 2007 Location: Battle Ground, WA
Karma: 0
|
Senior Member |
|
|
A Hamilto wrote on Thu, 13 March 2014 14:30 |
corleyw wrote on Thu, 13 March 2014 10:44 | I posted a few pix of my macerator hose storage setup, but these are the first photos I have posted. I probably did it all wrong, but now I need to figure out how to show them here or what the link is to them. HELP!
| http://www.gmcmhphotos.com/photos/corley-s-photos/p53622-macerator-hose-storage.html
To display in the forum, you can use the IMG tags. If you type an image url like this
[img]http://www.gmcmhphotos.com/photos/data/6568/P1040314_800X600_.JPG[/img]
|
Really? You gotta post the URL manually? Whodda thought that? I had assumed the photos were tied somehow to posting a message automatically... Well, in that case, I'll also offer up this one, just to see if it works (and show the hose end).
Corley
'76 Glenbrook
29 other vehicles
[Updated on: Fri, 14 March 2014 08:52] Report message to a moderator
|
|
|