GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Back suspension height adjustment
Back suspension height adjustment [message #242889] Mon, 10 March 2014 06:44 Go to previous message
tgeiger is currently offline  tgeiger   United States
Messages: 518
Registered: February 2006
Location: kansas city
Karma:
Senior Member
Just want to check to see if I got this right. I've had a leak down issue with my passenger side rear suspension quad bags. I got that leak fixed I beleive. The other issue is the paasenger side seemed to be lower than the driver side. I put the Autolevel mode on and when it shut off...the passenger side measured 33" to the rear wheel well skirt seam and the driver side measured 35"...so a difference of 2"...I read the manual and it mentioned the leveling arm adjustment nut. It said to loosen it and make the coach level..34" to the seam on both sides...which measure roughly 11 3/4" at the back slot in the main frame, then re-tighten. So my question is, did I get this right. Will this now correctly level at 34" on both sides? Seemed to be pretty straight forward to make this adjustment.

Tom Geiger 76 Eleganza II KCMO
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Gauge cluster question
Next Topic: [GMCnet] Brian Waddell's Steering Problem
Goto Forum:
  


Current Time: Fri Oct 04 04:17:56 CDT 2024

Total time taken to generate the page: 0.00809 seconds