GMCforum: GMCnet » [GMCnet] Torsion Bar Update

Home » Public Forums » GMCnet » [GMCnet] Torsion Bar Update

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Torsion Bar Update [message #242235]

Mon, 03 March 2014 21:26

p.huber

Messages: 73
Registered: June 2012
Location: Oakland

Karma:

Member

Hi you all,

I just got word from the manufacturer that all torsion bars are at heat
treating for one week and the shipping date is presently still open, but I
guess it will be very soon and I estimate the Torsion Bars will go out to
each of you by 3-15-2014. By the way I had 27 Torsion Bar sets assigned
(more than 15 we talked about) and everybody paid on time including the
shipping charge to their location, that said I collected 54 checks that had
to be sent to me, everybody cooperated super and it was quite a challenge.
Thank you guys! Each location required a different shipping cost and
naturally California Sales taxes had to be collected. There is a question
how to install the new Torsion Bars. Well, grease up the A frame and enter
the Torsion Bar, the rear at the pork chop should show either L.H or R.H..
Use your existing pork chops. You will be pleased with new torsion Bar as I
was 22 years ago when I redesigned it 19% heavier with the same
manufacturer.

Best Regards

Peter D. Huber

GMC Royale 1978 403

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Torsion Bar Update By: p.huber on Mon, 03 March 2014 21:26
		Re: [GMCnet] Torsion Bar Update By: Michael Leipold on Tue, 04 March 2014 07:01
		Re: [GMCnet] Torsion Bar Update By: SeanKidd on Wed, 05 March 2014 07:06
		Re: [GMCnet] Torsion Bar Update By: bwevers on Fri, 28 March 2014 13:48
		Re: [GMCnet] Torsion Bar Update By: jhb1 on Fri, 28 March 2014 14:22
		Re: [GMCnet] Torsion Bar Update By: A Hamilto on Fri, 28 March 2014 15:22

Previous Topic:	Re: [GMCnet] Bent bogie arm
Next Topic:	On the way home

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 09 05:23:52 CDT 2024

Total time taken to generate the page: 0.00618 seconds