GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Update on Archoil
[GMCnet] Update on Archoil [message #239326] Sun, 09 February 2014 18:37 Go to previous message
glwgmc is currently offline  glwgmc   United States
Messages: 1014
Registered: June 2004
Karma:
Senior Member
When we left on this 3000-4000 mile snowbird trip I said I would try and report on the Archoil products that Armand M. Posted about a month or two ago. I can now say with some certainty that the transmission does now shift more smoothly and likely runs at reduced temperatures, and the generator does run more smoothly. No placebo effect here, it appears quite real. I have no way of doing an exact before-after test over the same terrain at the same speed and load conditions at the same ambient temps to prove the lower temp observation, but it certainly seems far more than coincident.

The generator change is noticeable to both Sharon and to me independently. Is this due to the "friction modifier" or to the fuel conditioner, I don't know. But it certainly appears to be real to the two of us. No observation yet on the mileage or the engine smoothness- temperature effects of the friction modifier yet as we will not add the friction modifier until we do the next oil change. Anecdotal observation is the fuel additive appears to be beneficial to both smoothness and lower operating temperature, but won't know anything about the friction modifier until later. So far, so good.

Jerry

Jerry Work
The Dovetail Joint
Fine furniture designed & hand crafted
in the 1907 former Masonic Temple building
in historic Kerby, OR
http://jerrywork.com

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Jerry & Sharon Work
78 Royale
Kerby, OR
 
Read Message
Read Message
Read Message
Previous Topic: Fuel line routing
Next Topic: [GMCnet] GMCMI Convention Deadline Approaching
Goto Forum:
  


Current Time: Fri Nov 01 08:33:16 CDT 2024

Total time taken to generate the page: 0.00833 seconds