GMCforum: GMCnet » motor valve adjustment

Home » Public Forums » GMCnet » motor valve adjustment

Show: Today's Messages :: Polls :: Message Navigator

motor valve adjustment [message #236278]

Thu, 16 January 2014 10:02

skip2

Messages: 544
Registered: September 2011
Location: Winter Haven,FL (center o...

Karma:

Senior Member

Going after the valve seals this weekend and I've heard 2 trains of thought on setting the lash afterwards,one has 16 different positions you have to put the crank and cam at to assure you are on the low spot of the cam and the other was just 2 positions for the crank where you do half then change and do the other half. All my valve adjusting has been with motor running and on vehicles that were already greasy and the leaking oil didn't matter to much. Any experiences with or suggestions would really be appreciated.
Skip Hartline

74 Canyon Lands, FiTech, 3.7 FD LSD, Manny Tranny, Springfield Distributor, 2001 Chevy Tracker Ragtop Towd

Report message to a moderator

[Message index]

		motor valve adjustment By: skip2 on Thu, 16 January 2014 10:02
		Re: [GMCnet] motor valve adjustment By: James Hupy on Thu, 16 January 2014 10:08
		Re: [GMCnet] motor valve adjustment By: powwerjon on Thu, 16 January 2014 11:18
		Re: motor valve adjustment By: skip2 on Thu, 16 January 2014 11:32
		Re: motor valve adjustment By: Harry on Thu, 16 January 2014 14:08
		Re: motor valve adjustment By: Matt Colie on Thu, 16 January 2014 14:25
		Re: motor valve adjustment By: Larry on Thu, 16 January 2014 14:50
		Re: motor valve adjustment By: Matt Colie on Thu, 16 January 2014 15:33
		Re: [GMCnet] motor valve adjustment By: Mr ERFisher on Thu, 16 January 2014 16:11
		Re: [GMCnet] motor valve adjustment By: skip2 on Thu, 16 January 2014 18:41
		Re: [GMCnet] motor valve adjustment By: USAussie on Thu, 16 January 2014 18:59
		Re: [GMCnet] motor valve adjustment By: Larry on Thu, 16 January 2014 20:01
		Re: motor valve adjustment By: skip2 on Thu, 16 January 2014 16:00
		Re: motor valve adjustment By: Matt Colie on Thu, 16 January 2014 22:12
		Re: motor valve adjustment By: LarryInSanDiego on Sat, 18 January 2014 10:26
		Re: motor valve adjustment By: Matt Colie on Sat, 18 January 2014 12:19
		Re: [GMCnet] motor valve adjustment By: jhbridges on Sun, 19 January 2014 09:11
		Re: [GMCnet] motor valve adjustment By: USAussie on Thu, 16 January 2014 16:19

Previous Topic:	[GMCnet] Price of one?
Next Topic:	Few more pics of progress on the Murray Mansion

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Feb 08 21:03:47 CST 2025

Total time taken to generate the page: 0.01523 seconds