| Revcon Torsion Bars [message #234857] |
Thu, 02 January 2014 20:46 |
Hal StClair
Messages: 971
Registered: March 2013
Location: Rio Rancho NM
Karma:
|
Senior Member |
|
|
I just managed to pick up a pair of torsion bars from a 1979 33' slant nose Revcon. They look to be the same dimensions length and hex ends as the GMC except for the diameter. It looks like they are about 1.38"in diameter. I've tried to find the specs on them but haven't had much luck. The Revcon people have nothing that compares with this GMC site/knowledge base. I think with the extra weight of the 4L80e and 6.5 TD engine and Dana 70, I'm guessing an additional 400 lbs or so, these bars might just do the job.
Along with the Revcon transfer case and front differential(if used), I hope my 77 Royale will still be considered a GMC, LOL.
Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
[Updated on: Thu, 02 January 2014 20:48] Report message to a moderator |
|
|
|
GMCforum
Search
Help
Register
Login
Home
