Re: [GMCnet] frame rust pix [message #234363] |
Sun, 29 December 2013 15:28 |
Jim Bounds
Messages: 842 Registered: January 2004
Karma:
|
Senior Member |
|
|
Its too bad but today, this is an all too common thing. Scott was super luck when he found his flamme section. Dont forget Scott driving and what you had to do to get that frame part. Hey, if you're going to paint a pic on what faces him that too will be an issue. Man, you were also fortunate to have Frank there to help-- most fortunate. I bring this up to go along with your well laid out discovery and decision tree. I would also commend you on how well you rolled with the decesion to do the right thing. That wasn't easy but in the end your front framss end up being one of the best feastures of your coach. Thats what it takes, revel in what you have and don't sweat problems. I know that about you,
Jim Bounds
-------- Original message --------
From: Dave Pottebaum <pottebaum5@msn.com>
Date: 12/29/2013 3:52 PM (GMT-05:00)
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] frame rust pix
Hopefully this will help the folks with email only. Thanks for the heads up.
http://www.gmcmhphotos.com/photos/g6500-frame-repair.html
--
Dave Pottebaum
Bondurant, Iowa
1978 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|