GMCforum: GMCnet » Gauge Cluster Repair

Home » Public Forums » GMCnet » Gauge Cluster Repair

Show: Today's Messages :: Polls :: Message Navigator

Gauge Cluster Repair [message #234057]

Thu, 26 December 2013 19:50

Richard Andis

Messages: 261
Registered: January 2013
Location: HELL Paso, TX

Karma:

Senior Member

While transplanting the circuit board on the back of the gauge cluster I neglected to document a few things.

First thing I discovered were that the ballast resistors for the gauges were color coded. There was a green, blue, and a red one (marked on the back). Anybody know which resistor goes to which gauge?

Via search, I've discovered Water Temp uses a red one.

Valhalla - 1978 GMC Royale rear twin [SOLD]
Walküre - 1974 VW Thing (Toad)

[Updated on: Thu, 26 December 2013 19:58]

Report message to a moderator

[Message index]

		Gauge Cluster Repair By: Richard Andis on Thu, 26 December 2013 19:50
		Re: Gauge Cluster Repair By: KevinZ on Thu, 26 December 2013 21:19
		Re: Gauge Cluster Repair By: Richard Andis on Fri, 27 December 2013 21:19
		Re: Gauge Cluster Repair By: Richard Andis on Mon, 30 December 2013 18:10
		Re: Gauge Cluster Repair By: A Hamilto on Mon, 30 December 2013 19:50
		Re: Gauge Cluster Repair By: Richard Andis on Mon, 30 December 2013 20:38
		Re: [GMCnet] Gauge Cluster Repair By: Ken Henderson on Tue, 31 December 2013 00:39
		Re: [GMCnet] Gauge Cluster Repair By: Mr ERFisher on Tue, 31 December 2013 08:52
		Re: [GMCnet] Gauge Cluster Repair By: Bruce Hart on Wed, 01 January 2014 19:11
		Re: [GMCnet] Gauge Cluster Repair By: Loffen on Thu, 02 January 2014 06:35

Previous Topic:	[GMCnet] Aerogel Insulation
Next Topic:	[GMCnet] black tank frame cut out

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jan 01 06:29:59 CST 2025

Total time taken to generate the page: 0.02658 seconds