| [GMCnet] Remote Transmission Dipstick Calibration [message #234051] |
Thu, 26 December 2013 18:53  |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
G'day,
I promised to write up a procedure to calibrate a remote transmission dipstick. When I went down to the workshop I discovered that I
had forgotten that The Blue Streak is up on jack stands and I can't tell if you can get to the modulator with the GMC on the ground
or if you have to raise it on jack stands.
Can anyone tell me if you can R&R the modulator with a GMC at Travel height?
My intent is to have Manny review the procedure and I want it to take up as little of his time as possible therefore I want to do my
best to make sure it's 100% correct BEFORE I send it to him.
Regards,
Rob M.
Sydney, Australia
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Remote Transmission Dipstick Calibration [message #234086 is a reply to message #234051] |
Thu, 26 December 2013 23:34  |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
| Robert Mueller wrote on Thu, 26 December 2013 18:53 |
G'day,
I promised to write up a procedure to calibrate a remote transmission dipstick. When I went down to the workshop I discovered that I
had forgotten that The Blue Streak is up on jack stands and I can't tell if you can get to the modulator with the GMC on the ground
or if you have to raise it on jack stands.
Can anyone tell me if you can R&R the modulator with a GMC at Travel height?
My intent is to have Manny review the procedure and I want it to take up as little of his time as possible therefore I want to do my
best to make sure it's 100% correct BEFORE I send it to him.
Regards,
Rob M.
Sydney, Australia
|
You can squeeze under there I did it to one in a parking lot one time. You only need to remove one vacuum line and remove one bolt.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
|
|
|
|
| Re: [GMCnet] Remote Transmission Dipstick Calibration [message #234212 is a reply to message #234209] |
Fri, 27 December 2013 22:07 |
|
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Hal,
Hmmmm, I am grossly insulted! ;-)
Unfortunately your statement probably true!
I could have fit under there easily in my mid thirties when I weighed 175 lbs and my OD was much smaller.
Regards,
Rob M.
-----Original Message-----
From: Hal Kading
Rob,
Not to embarrass you or any thing like that, :d Ken could squeeze under there, you, not a chance!
Hal
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
Ken could squeeze under there, you, not a chance!