Plumbing question [message #232717] |
Mon, 09 December 2013 13:46 ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
Otterwan
![United States United States](/GMCforum/images/flags/us.png) Messages: 946 Registered: July 2013 Location: Lynnwood (north of Seattl...
Karma: 0
|
Senior Member |
|
|
I thought my coach had PEX as OEM plumbing, but now I'm not sure. It has plastic tubing with some sort of conical compression fitting that appears to be glued onto the tubing. As I'm doing some repairs/upgrades I'm curious as to:
* What is the original system called
* Is it compatible with PEX fittings
1977 Birchaven, Lynnwood WA - "We may not be able to stop all evil in the world, but I know that how we treat one another is entirely up to us."
|
|
|
|
Re: [GMCnet] Plumbing question [message #232721 is a reply to message #232719] |
Mon, 09 December 2013 14:05 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
Otterwan
![United States United States](/GMCforum/images/flags/us.png) Messages: 946 Registered: July 2013 Location: Lynnwood (north of Seattl...
Karma: 0
|
Senior Member |
|
|
scott cowden wrote on Mon, 09 December 2013 11:58 | What Color is the tubing?
|
Black in the 1976 Royale, grey in the 1978 Palm beach, but it appears to be the same stuff.
1977 Birchaven, Lynnwood WA - "We may not be able to stop all evil in the world, but I know that how we treat one another is entirely up to us."
|
|
|
Re: Plumbing question [message #232726 is a reply to message #232717] |
Mon, 09 December 2013 14:58 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
![](http://gmc.mybirdfeeder.net/GMCforum/images/avatars/default_118.gif) |
Richard RV
![United States United States](/GMCforum/images/flags/us.png) Messages: 631 Registered: July 2012 Location: Full-timer for 12 years, ...
Karma: -17
|
Senior Member |
|
|
The original plumbing was copper, then they switched to polybutylene, which is usually grey and as you described.
Sharkbite type fittings will work, but I don't have enough time/experience with them in an RV application to recommend push-on fittings. I did replace my kitchen faucet and use Watts plastic push-on fittings to hook up to the polybutylene original lines.
Richard
'77 Birchaven TZE...777;
'76 Palm Beach under construction;
‘76 Edgemont waiting its turn
|
|
|
|
Re: Plumbing question [message #232756 is a reply to message #232717] |
Mon, 09 December 2013 17:25 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
phil
![United States United States](/GMCforum/images/flags/us.png) Messages: 24 Registered: July 2012 Location: Stevensville, Montana
Karma: 1
|
Junior Member |
|
|
Richard--As everyone has told you, you have polybutylene piping. If you want to use pex in making repairs/mods, Watts makes a transition coupler (LFP-505) that will connect the two together. You should be able to find them at a good hardware store. Don't use regular pex fittings for the polybutylene!
Thanks,
Phil
'76 Eleganza II
Stevensville, Mt.
Montana-where Californians move to.
[Updated on: Mon, 09 December 2013 17:26] Report message to a moderator
|
|
|
Re: Plumbing question [message #232808 is a reply to message #232717] |
Tue, 10 December 2013 10:13 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) |
Chris Tyler
![United States United States](/GMCforum/images/flags/us.png) Messages: 458 Registered: September 2013 Location: Odessa FL
Karma: 7
|
Senior Member |
|
|
If you need to make a connection in an inaccessible area you can Mc Gyver it by cutting the Quest line, using a brass barb fitting to the other line, heating the line until softened, pushing it on and tighten 2 hose clamps while still soft.
76 Glenbrook
|
|
|