GMCforum: GMCnet » Re: [GMCnet] Alltrade Wheel Bearing Kit

Home » Public Forums » GMCnet » Re: [GMCnet] Alltrade Wheel Bearing Kit

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Alltrade Wheel Bearing Kit [message #232457]

Fri, 06 December 2013 13:48

hnielsen2

Messages: 1434
Registered: February 2004
Location: Alpine CA

Karma: 0

Senior Member

David
I'm not sure it would work on our stock hubs
I have a GMC front bearing puller and installer you are welcome to use.
You pay for shipping out and back.
It weights about 10 pounds.
My ZIP is 91903
Howard
Alpine Ca
74 Canyon Lands

All is well with my Lord

> On Dec 6, 2013, at 11:36, David Orders <dao@oarsllc.com> wrote:
>
>
>
> Looks like a good kit and gets good reviews
>
> http://www.amazon.com/Alltrade-648741-Bearing-Removal-Installation/dp/B0028QGT5Y/ref=cm_cr_pr_pb_t
>
> and would work on my other vehicles as well.
>
>
>
> --
> 1976 Royale "Twinkie II", 1978 Palm Beach with front end fire. Lynnwood WA - “If you could reason with religious people there would be no religious people” - House, MD
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

All is well with my Lord

Report message to a moderator

Re: [GMCnet] Alltrade Wheel Bearing Kit [message #232466 is a reply to message #232457]

Fri, 06 December 2013 15:42

Otterwan

Messages: 946
Registered: July 2013
Location: Lynnwood (north of Seattl...

Karma: 0

Senior Member

Thanks Howard. I don't need it right now, I just ran across this kit and wondered if anyone here had used it.

1977 Birchaven, Lynnwood WA - "We may not be able to stop all evil in the world, but I know that how we treat one another is entirely up to us."

Report message to a moderator

Re: [GMCnet] Alltrade Wheel Bearing Kit [message #232488 is a reply to message #232457]

Fri, 06 December 2013 18:08

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

Howard,

I used the magnify feature of that ad to look at that kit as close as possible and I will stick my neck out and state it won't work
with the GMC front wheel bearings.

David,

Here's a link to Gene's website where there is a plethora of information on the front wheel bearings:

http://gmcmotorhome.info/list.html#front

There is a video showing Ken Thoma doing an R&R of a GMC front wheel bearings but I can't remember where it is.

Regards,
Rob M.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] Alltrade Wheel Bearing Kit [message #232490 is a reply to message #232457]

Fri, 06 December 2013 18:30

Craig Lechowicz

Messages: 541
Registered: October 2006
Location: Waterford, MI

Karma: 0

Senior Member

David,
Between looking at the magnified picture and reading the 1st several reviews, I think it would work for only part of the job. You need a way to get the spindle out of the knuckle, which this won't do. They don't fit very tight, (in fact, are often too loose) so it may just pull out, or a slide hammer with the adapter that goes on the lug nuts would work. This tool would potentially help remove the bearing outer races, but as mentioned, that is a relatively loose fit on our vehicles. The more difficult part is getting the inner part of the bearings off of the spindle. I may have missed it, but it doesn't look like this tool provides a way of doing that. A more GMC specific tool does that, or you could use a bearing splitter with a large puller assembly or a hydraulic press. But to make a long story short, I don't think it will get you all the way through the job.

Craig Lechowicz
'77 Kingsley, Waterford, MI

Report message to a moderator

Previous Topic:	frontbearing inner seal
Next Topic:	Re: [GMCnet] Alltrade Wheel Bearing Kit

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 03 10:22:12 CDT 2024

Total time taken to generate the page: 0.02617 seconds