GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Alternator Tensioner Install
Alternator Tensioner Install [message #232360] Thu, 05 December 2013 20:13 Go to next message
Richard Andis is currently offline  Richard Andis   United States
Messages: 261
Registered: January 2013
Location: HELL Paso, TX
Karma: 0
Senior Member
Attempted to install Applied's alternator tensioning system in an effort to make maintenance of the belts a bit easier. 4 hours later I ended giving up and installed the belt the OEM way.

The main problem was that if I installed the tensioner first, I couldn't loosen the alternator enough to get the belt on. The "L" stop bracket kept interfering with getting the alternator loose enough to slip the belt on. I believe I was using the correct belt (Gates 7570),

Is there a secret squirrel method to get this system to work?

This is on a 78 Royale with stock 403.


Valhalla - 1978 GMC Royale rear twin [SOLD]
Walküre - 1974 VW Thing (Toad)
Re: [GMCnet] Alternator Tensioner Install [message #232364 is a reply to message #232360] Thu, 05 December 2013 20:17 Go to previous messageGo to next message
mickeysss is currently offline  mickeysss   United States
Messages: 1476
Registered: January 2012
Karma: 0
Senior Member
I am also interested in this as well as nelson mendella RIP, i bought one of these and does it work.

Mickey anaheim ca. 77 palm beach.


On Dec 5, 2013, at 6:13 PM, Richard Andis wrote:

>
>
> Attempted to install Applied's alternator tensioning system in an effort to make maintenance of the belts a bit easier. 4 hours later I ended giving up and installed the belt the OEM way.
>
> The main problem was that if I installed the tensioner first, I couldn't loosen the alternator enough to get the belt on. The "L" stop bracket kept interfering with getting the alternator loose enough to slip the belt on. I believe I was using the correct belt (Gates 7570),
>
> Is there a secret squirrel method to get this system to work?
>
> This is on a 78 Royale with stock 403.
> --
> "Vahalla" - 1978 GMC Royale (Rear Twin)
> "Walküre" - 1974 VW Thing
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Alternator Tensioner Install [message #232365 is a reply to message #232364] Thu, 05 December 2013 20:39 Go to previous messageGo to next message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
I have one. After not being able to get it mounted I just sat back and looked at it. The bolt they sent with it was too short. I called and got the bolt replaced with a longer one and it mounted right up.
Dan


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
Re: [GMCnet] Alternator Tensioner Install [message #232386 is a reply to message #232365] Thu, 05 December 2013 23:43 Go to previous messageGo to next message
mickeysss is currently offline  mickeysss   United States
Messages: 1476
Registered: January 2012
Karma: 0
Senior Member
THank you. mickey :-)

mendella's favorite peom

Out of the night that covers me,
Black as the pit from pole to pole,
I thank whatever god may be
For my unconquerable soul.

In the fell clutch of circumstance
I have not winced nor cried aloud.
Under the bludgeonings of chance
My head is bloody, but unbowed.

Beyond this place of wrath and tears
Looms but the Horror of the shade,
And yet the menace of the years
Finds and shall find me unafraid.

It matters not how strait the gate,
How charged with punishments the scroll,
I am the master of my fate:
I am the captain of my soul.


On Dec 5, 2013, at 6:39 PM, Dan Gregg wrote:

>
>
> I have one. After not being able to get it mounted I just sat back and looked at it. The bolt they sent with it was too short. I called and got the bolt replaced with a longer one and it mounted right up.
> Dan
> --
> Dan & Teri Gregg
> Dexter, Mo.
>
> http://danandteri.blogspot.com/
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Alternator Tensioner Install [message #232388 is a reply to message #232386] Thu, 05 December 2013 23:57 Go to previous message
ljdavick is currently offline  ljdavick   United States
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
Senior Member
A great man whose big life touched so many. I’m happy to know many people, who in a much smaller way, live up to these kind of ideals, and in their way make this world a better place. I’m richer for having known the big and small. Just look at the friendship and generosity we witness here daily.

Dan says it best - Life is Good.

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, CA

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
Previous Topic: Re: [GMCnet] PORK CHOPS
Next Topic: Re: [GMCnet] PORK CHOPS
Goto Forum:
  


Current Time: Wed Oct 02 07:34:35 CDT 2024

Total time taken to generate the page: 0.00624 seconds