|
|
|
Re: [GMCnet] Mystery Table? [message #231943 is a reply to message #231930] |
Sun, 01 December 2013 21:02 |
1275gtsport
Messages: 272 Registered: September 2009 Location: Rothesay NB
Karma: 0
|
Senior Member |
|
|
In the video you line the table up several times with where it would go. the mount on the dash is (or wood be) under the right side of the instrement panel.
there appears to be a black hole uner the padded part of the instrement panel (could be a shadow) that is where it would locate.
On my 77 the screws went up into that padded part. so when the bracket was removed the holes do not show. the panel on mine is broken and would need to be fixed If I had the correct table.
the leg folds so that if you need to get into the hatch you can just fold the table down. you then leave it there no ned to find a place to stow it while working on the engine.
Adam Raeburn
Rothesay, NB
1976 Austin Mini
1977 GMC Palm Beach
---------------------------------------------------
Once you replace everything that is attached to something else. It will all be fixed.
|
|
|
|
Re: [GMCnet] Mystery Table? [message #231967 is a reply to message #231930] |
Mon, 02 December 2013 11:04 |
|
Bob M
Messages: 100 Registered: August 2005 Location: Carlisle, PA
Karma: 0
|
Senior Member |
|
|
Yep, the responders are correct. The slide on the front left of the table slides into a similar slide on the bottom of the dash under the radio and heater controls and the leg snaps down. I still use mine.
Bob Moss
'77 Eleganza II
Bob Moss
|
|
|