Home » Public Forums » GMCnet » [GMCnet] Rosta Help
[GMCnet] Rosta Help [message #229870] |
Thu, 14 November 2013 23:21 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Who's the Rosta cruise control guru now that we've lost Duane Simmons?
Since I've never touched on, I wasn't of any help to Frank Jenkins when he
called to say
his has quit. If anyone can help, call him, or I'll put you in contact if
you don't have his number.
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI & EBL
www.gmcwipersetc.com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
Re: [GMCnet] Rosta Help [message #229878 is a reply to message #229870] |
Fri, 15 November 2013 05:37 |
Steven Ferguson
Messages: 3447 Registered: May 2006
Karma: 0
|
Senior Member |
|
|
When neither Duane nor I could get mine to operate properly, I asked Jim
Bounds to check it out while the coach was at the COOP. He had it working
correctly in about 15 min IIRC.
Steve F.
On Thu, Nov 14, 2013 at 10:21 PM, Ken Henderson <hend4800@bellsouth.net>wrote:
> Who's the Rosta cruise control guru now that we've lost Duane Simmons?
> Since I've never touched on, I wasn't of any help to Frank Jenkins when he
> called to say
> his has quit. If anyone can help, call him, or I'll put you in contact if
> you don't have his number.
>
> Ken H.
> Americus, GA
> '76 X-Birchaven w/Cad500/Howell EFI & EBL
> www.gmcwipersetc.com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Take care,
Steve
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Rosta Help [message #229885 is a reply to message #229870] |
Fri, 15 November 2013 07:16 |
|
hnielsen2
Messages: 1434 Registered: February 2004 Location: Alpine CA
Karma: 0
|
Senior Member |
|
|
I still can't get ours to work.
Howard
Alpine Ca
All is well with my Lord
> On Nov 15, 2013, at 3:37, "botiemad ." <botiemad11@gmail.com> wrote:
>
> When neither Duane nor I could get mine to operate properly, I asked Jim
> Bounds to check it out while the coach was at the COOP. He had it working
> correctly in about 15 min IIRC.
> Steve F.
>
>
> On Thu, Nov 14, 2013 at 10:21 PM, Ken Henderson <hend4800@bellsouth.net>wrote:
>
>> Who's the Rosta cruise control guru now that we've lost Duane Simmons?
>> Since I've never touched on, I wasn't of any help to Frank Jenkins when he
>> called to say
>> his has quit. If anyone can help, call him, or I'll put you in contact if
>> you don't have his number.
>>
>> Ken H.
>> Americus, GA
>> '76 X-Birchaven w/Cad500/Howell EFI & EBL
>> www.gmcwipersetc.com
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
> --
> Take care,
> Steve
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|
Re: [GMCnet] Rosta Help [message #229887 is a reply to message #229885] |
Fri, 15 November 2013 07:22 |
emerystora
Messages: 4442 Registered: January 2004
Karma: 13
|
Senior Member |
|
|
there is an in-line fuse in the wiring. Probably hidden behind you dash. check that.
Emery Stora
77 Kingsley
Frederick, CO
On Nov 15, 2013, at 6:16 AM, Howard Nielsen <hnielsen2@cox.net> wrote:
> I still can't get ours to work.
> Howard
> Alpine Ca
>
>
> All is well with my Lord
>
>
>
>> On Nov 15, 2013, at 3:37, "botiemad ." <botiemad11@gmail.com> wrote:
>>
>> When neither Duane nor I could get mine to operate properly, I asked Jim
>> Bounds to check it out while the coach was at the COOP. He had it working
>> correctly in about 15 min IIRC.
>> Steve F.
>>
>>
>> On Thu, Nov 14, 2013 at 10:21 PM, Ken Henderson <hend4800@bellsouth.net>wrote:
>>
>>> Who's the Rosta cruise control guru now that we've lost Duane Simmons?
>>> Since I've never touched on, I wasn't of any help to Frank Jenkins when he
>>> called to say
>>> his has quit. If anyone can help, call him, or I'll put you in contact if
>>> you don't have his number.
>>>
>>> Ken H.
>>> Americus, GA
>>> '76 X-Birchaven w/Cad500/Howell EFI & EBL
>>> www.gmcwipersetc.com
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>>
>>
>> --
>> Take care,
>> Steve
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Rosta Help [message #229888 is a reply to message #229870] |
Fri, 15 November 2013 07:29 |
|
hnielsen2
Messages: 1434 Registered: February 2004 Location: Alpine CA
Karma: 0
|
Senior Member |
|
|
Emery
Thank you I'll take a look.
I had this installed for over five years.
Still not working.
I think I'll start over
Howard
All is well with my Lord
> On Nov 15, 2013, at 5:22, Emery Stora <emerystora@mac.com> wrote:
>
> there is an in-line fuse in the wiring. Probably hidden behind you dash. check that.
>
> Emery Stora
> 77 Kingsley
> Frederick, CO
>
>> On Nov 15, 2013, at 6:16 AM, Howard Nielsen <hnielsen2@cox.net> wrote:
>>
>> I still can't get ours to work.
>> Howard
>> Alpine Ca
>>
>>
>> All is well with my Lord
>>
>>
>>
>>> On Nov 15, 2013, at 3:37, "botiemad ." <botiemad11@gmail.com> wrote:
>>>
>>> When neither Duane nor I could get mine to operate properly, I asked Jim
>>> Bounds to check it out while the coach was at the COOP. He had it working
>>> correctly in about 15 min IIRC.
>>> Steve F.
>>>
>>>
>>> On Thu, Nov 14, 2013 at 10:21 PM, Ken Henderson <hend4800@bellsouth.net>wrote:
>>>
>>>> Who's the Rosta cruise control guru now that we've lost Duane Simmons?
>>>> Since I've never touched on, I wasn't of any help to Frank Jenkins when he
>>>> called to say
>>>> his has quit. If anyone can help, call him, or I'll put you in contact if
>>>> you don't have his number.
>>>>
>>>> Ken H.
>>>> Americus, GA
>>>> '76 X-Birchaven w/Cad500/Howell EFI & EBL
>>>> www.gmcwipersetc.com
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>>>
>>>
>>> --
>>> Take care,
>>> Steve
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|
Re: [GMCnet] Rosta Help [message #229898 is a reply to message #229888] |
Fri, 15 November 2013 09:01 |
Mr ERFisher
Messages: 7117 Registered: August 2005
Karma: 2
|
Senior Member |
|
|
alternator may need a ground
ask Bovee
On Fri, Nov 15, 2013 at 5:29 AM, Howard Nielsen <hnielsen2@cox.net> wrote:
> Emery
> Thank you I'll take a look.
> I had this installed for over five years.
> Still not working.
> I think I'll start over
> Howard
>
> All is well with my Lord
>
>
>
> > On Nov 15, 2013, at 5:22, Emery Stora <emerystora@mac.com> wrote:
> >
> > there is an in-line fuse in the wiring. Probably hidden behind you
> dash. check that.
> >
> > Emery Stora
> > 77 Kingsley
> > Frederick, CO
> >
> >> On Nov 15, 2013, at 6:16 AM, Howard Nielsen <hnielsen2@cox.net> wrote:
> >>
> >> I still can't get ours to work.
> >> Howard
> >> Alpine Ca
> >>
> >>
> >> All is well with my Lord
> >>
> >>
> >>
> >>> On Nov 15, 2013, at 3:37, "botiemad ." <botiemad11@gmail.com> wrote:
> >>>
> >>> When neither Duane nor I could get mine to operate properly, I asked
> Jim
> >>> Bounds to check it out while the coach was at the COOP. He had it
> working
> >>> correctly in about 15 min IIRC.
> >>> Steve F.
> >>>
> >>>
> >>> On Thu, Nov 14, 2013 at 10:21 PM, Ken Henderson <
> hend4800@bellsouth.net>wrote:
> >>>
> >>>> Who's the Rosta cruise control guru now that we've lost Duane Simmons?
> >>>> Since I've never touched on, I wasn't of any help to Frank Jenkins
> when he
> >>>> called to say
> >>>> his has quit. If anyone can help, call him, or I'll put you in
> contact if
> >>>> you don't have his number.
> >>>>
> >>>> Ken H.
> >>>> Americus, GA
> >>>> '76 X-Birchaven w/Cad500/Howell EFI & EBL
> >>>> www.gmcwipersetc.com
> >>>> _______________________________________________
> >>>> GMCnet mailing list
> >>>> Unsubscribe or Change List Options:
> >>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >>>
> >>>
> >>>
> >>> --
> >>> Take care,
> >>> Steve
> >>> _______________________________________________
> >>> GMCnet mailing list
> >>> Unsubscribe or Change List Options:
> >>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Rosta Help [message #230072 is a reply to message #229898] |
Sun, 17 November 2013 01:12 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Mr ERFisher wrote on Fri, 15 November 2013 09:01 | alternator may need a ground
ask Bovee
|
How can an alternator need a ground? It is mounted with three bolts to the master ground (the engine block).
Where would you run the ground lead from and to?
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
Re: [GMCnet] Rosta Help [message #230077 is a reply to message #229885] |
Sun, 17 November 2013 06:48 |
Steven Ferguson
Messages: 3447 Registered: May 2006
Karma: 0
|
Senior Member |
|
|
The alternator sets up an EMI field and the Rostra unit is very sensitive
to this. Jim fixed mine by simply moving it further away from the
alternator.
Steve F.
On Fri, Nov 15, 2013 at 6:16 AM, Howard Nielsen <hnielsen2@cox.net> wrote:
> I still can't get ours to work.
> Howard
> Alpine Ca
>
>
> All is well with my Lord
>
>
>
> > On Nov 15, 2013, at 3:37, "botiemad ." <botiemad11@gmail.com> wrote:
> >
> > When neither Duane nor I could get mine to operate properly, I asked Jim
> > Bounds to check it out while the coach was at the COOP. He had it
> working
> > correctly in about 15 min IIRC.
> > Steve F.
> >
> >
> > On Thu, Nov 14, 2013 at 10:21 PM, Ken Henderson <hend4800@bellsouth.net
> >wrote:
> >
> >> Who's the Rosta cruise control guru now that we've lost Duane Simmons?
> >> Since I've never touched on, I wasn't of any help to Frank Jenkins when
> he
> >> called to say
> >> his has quit. If anyone can help, call him, or I'll put you in contact
> if
> >> you don't have his number.
> >>
> >> Ken H.
> >> Americus, GA
> >> '76 X-Birchaven w/Cad500/Howell EFI & EBL
> >> www.gmcwipersetc.com
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> >
> >
> > --
> > Take care,
> > Steve
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Take care,
Steve
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Rosta Help [message #230084 is a reply to message #230075] |
Sun, 17 November 2013 08:32 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I installed mine and never had a problem after that. I have no idea where the book for it is. That is why I did not volunteer to help. I did rework the brake light switch cruise switch so it does not rely on the brake lights working. I did that at installation time.
I use it all the time. One in a great while I do get it confused and have to power it off and back on again.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
Re: [GMCnet] Rosta Help [message #230086 is a reply to message #230084] |
Sun, 17 November 2013 08:43 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
My new used toad has the Ford cruise control steering wheel, and the plug is on the column. Anybody know if the Rostra uses the Ford series of commands, or the Dodge series? Both have off - on. Ford uses increse as the set control and has a decrease and resume button. Dodge has a seperate set control and a disengage along with faster and slower buttons. Faster is resume.
--johnny
From: Ken Burton <n9cv@comcast.net>
To: gmclist@temp.gmcnet.org
Sent: Sunday, November 17, 2013 9:32 AM
Subject: Re: [GMCnet] Rosta Help
I installed mine and never had a problem after that. I have no idea where the book for it is. That is why I did not volunteer to help. I did rework the brake light switch cruise switch so it does not rely on the brake lights working. I did that at installation time.
I use it all the time. One in a great while I do get it confused and have to power it off and back on again.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Rosta Help [message #230123 is a reply to message #229870] |
Mon, 18 November 2013 00:52 |
|
hnielsen2
Messages: 1434 Registered: February 2004 Location: Alpine CA
Karma: 0
|
Senior Member |
|
|
Steve I have it mounted inside under the couch.
I'll give it a try.
Maybe build a sheet metal box or some thing to block electronic field from the EMI?
Thanks
Howard
.
All is well with my Lord
> On Nov 17, 2013, at 4:48, "botiemad ." <botiemad11@gmail.com> wrote:
>
> The alternator sets up an EMI field and the Rostra unit is very sensitive
> to this. Jim fixed mine by simply moving it further away from the
> alternator.
> Steve F.
>
>
>> On Fri, Nov 15, 2013 at 6:16 AM, Howard Nielsen <hnielsen2@cox.net> wrote:
>>
>> I still can't get ours to work.
>> Howard
>> Alpine Ca
>>
>>
>> All is well with my Lord
>>
>>
>>
>>> On Nov 15, 2013, at 3:37, "botiemad ." <botiemad11@gmail.com> wrote:
>>>
>>> When neither Duane nor I could get mine to operate properly, I asked Jim
>>> Bounds to check it out while the coach was at the COOP. He had it
>> working
>>> correctly in about 15 min IIRC.
>>> Steve F.
>>>
>>>
>>> On Thu, Nov 14, 2013 at 10:21 PM, Ken Henderson <hend4800@bellsouth.net
>>> wrote:
>>>
>>>> Who's the Rosta cruise control guru now that we've lost Duane Simmons?
>>>> Since I've never touched on, I wasn't of any help to Frank Jenkins when
>> he
>>>> called to say
>>>> his has quit. If anyone can help, call him, or I'll put you in contact
>> if
>>>> you don't have his number.
>>>>
>>>> Ken H.
>>>> Americus, GA
>>>> '76 X-Birchaven w/Cad500/Howell EFI & EBL
>>>> www.gmcwipersetc.com
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>>>
>>>
>>> --
>>> Take care,
>>> Steve
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
> --
> Take care,
> Steve
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|
Re: [GMCnet] Rosta Help [message #230130 is a reply to message #230123] |
Mon, 18 November 2013 07:03 |
gcbgold
Messages: 60 Registered: August 2012
Karma: -1
|
Member |
|
|
Howard,
I had a conversation a few years ago with Duane S. about how my Rostra would drop off lots of times when cruising down the road. He sent me a copy of his Rostra installation instructions. They had a Note at the bottom warning about alternator electrical interference and to run a 6 AWG wire from the alternator to the aluminum engine hatch frame. Never had a problem with my cruise control after adding that ground wire. Just hook your ground wire to a bolt that touches the alternator case and run it to the engine hatch frame. No need to build a metal box.
Gary Bovee
Red Bluff, CA
1978 GMC Royale
Free "Idiot's Internet Guide for Finding GMC MotorHome Information"
www.gmcidiotsguide.com
> On Nov 17, 2013, at 10:52 PM, Howard Nielsen <hnielsen2@cox.net> wrote:
>
> Steve I have it mounted inside under the couch.
> I'll give it a try.
> Maybe build a sheet metal box or some thing to block electronic field from the EMI?
> Thanks
> Howard
> .
>
>
> All is well with my Lord
>
>
>
>> On Nov 17, 2013, at 4:48, "botiemad ." <botiemad11@gmail.com> wrote:
>>
>> The alternator sets up an EMI field and the Rostra unit is very sensitive
>> to this. Jim fixed mine by simply moving it further away from the
>> alternator.
>> Steve F.
>>
>>
>>> On Fri, Nov 15, 2013 at 6:16 AM, Howard Nielsen <hnielsen2@cox.net> wrote:
>>>
>>> I still can't get ours to work.
>>> Howard
>>> Alpine Ca
>>>
>>>
>>> All is well with my Lord
>>>
>>>
>>>
>>>> On Nov 15, 2013, at 3:37, "botiemad ." <botiemad11@gmail.com> wrote:
>>>>
>>>> When neither Duane nor I could get mine to operate properly, I asked Jim
>>>> Bounds to check it out while the coach was at the COOP. He had it
>>> working
>>>> correctly in about 15 min IIRC.
>>>> Steve F.
>>>>
>>>>
>>>> On Thu, Nov 14, 2013 at 10:21 PM, Ken Henderson <hend4800@bellsouth.net
>>>> wrote:
>>>>
>>>>> Who's the Rosta cruise control guru now that we've lost Duane Simmons?
>>>>> Since I've never touched on, I wasn't of any help to Frank Jenkins when
>>> he
>>>>> called to say
>>>>> his has quit. If anyone can help, call him, or I'll put you in contact
>>> if
>>>>> you don't have his number.
>>>>>
>>>>> Ken H.
>>>>> Americus, GA
>>>>> '76 X-Birchaven w/Cad500/Howell EFI & EBL
>>>>> www.gmcwipersetc.com
>>>>> _______________________________________________
>>>>> GMCnet mailing list
>>>>> Unsubscribe or Change List Options:
>>>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>>
>>>>
>>>>
>>>> --
>>>> Take care,
>>>> Steve
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>>
>>
>> --
>> Take care,
>> Steve
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Re: [GMCnet] Rosta Help [message #230138 is a reply to message #229870] |
Mon, 18 November 2013 09:11 |
|
hnielsen2
Messages: 1434 Registered: February 2004 Location: Alpine CA
Karma: 0
|
Senior Member |
|
|
Gary
Thank You
All is well with my Lord
> On Nov 18, 2013, at 5:03, "Gary B." <gcbgold@gmail.com> wrote:
>
> Howard,
>
> I had a conversation a few years ago with Duane S. about how my Rostra would drop off lots of times when cruising down the road. He sent me a copy of his Rostra installation instructions. They had a Note at the bottom warning about alternator electrical interference and to run a 6 AWG wire from the alternator to the aluminum engine hatch frame. Never had a problem with my cruise control after adding that ground wire. Just hook your ground wire to a bolt that touches the alternator case and run it to the engine hatch frame. No need to build a metal box.
>
> Gary Bovee
> Red Bluff, CA
> 1978 GMC Royale
> Free "Idiot's Internet Guide for Finding GMC MotorHome Information"
> www.gmcidiotsguide.com
>
>> On Nov 17, 2013, at 10:52 PM, Howard Nielsen <hnielsen2@cox.net> wrote:
>>
>> Steve I have it mounted inside under the couch.
>> I'll give it a try.
>> Maybe build a sheet metal box or some thing to block electronic field from the EMI?
>> Thanks
>> Howard
>> .
>>
>>
>> All is well with my Lord
>>
>>
>>
>>> On Nov 17, 2013, at 4:48, "botiemad ." <botiemad11@gmail.com> wrote:
>>>
>>> The alternator sets up an EMI field and the Rostra unit is very sensitive
>>> to this. Jim fixed mine by simply moving it further away from the
>>> alternator.
>>> Steve F.
>>>
>>>
>>>> On Fri, Nov 15, 2013 at 6:16 AM, Howard Nielsen <hnielsen2@cox.net> wrote:
>>>>
>>>> I still can't get ours to work.
>>>> Howard
>>>> Alpine Ca
>>>>
>>>>
>>>> All is well with my Lord
>>>>
>>>>
>>>>
>>>>> On Nov 15, 2013, at 3:37, "botiemad ." <botiemad11@gmail.com> wrote:
>>>>>
>>>>> When neither Duane nor I could get mine to operate properly, I asked Jim
>>>>> Bounds to check it out while the coach was at the COOP. He had it
>>>> working
>>>>> correctly in about 15 min IIRC.
>>>>> Steve F.
>>>>>
>>>>>
>>>>> On Thu, Nov 14, 2013 at 10:21 PM, Ken Henderson <hend4800@bellsouth.net
>>>>> wrote:
>>>>>
>>>>>> Who's the Rosta cruise control guru now that we've lost Duane Simmons?
>>>>>> Since I've never touched on, I wasn't of any help to Frank Jenkins when
>>>> he
>>>>>> called to say
>>>>>> his has quit. If anyone can help, call him, or I'll put you in contact
>>>> if
>>>>>> you don't have his number.
>>>>>>
>>>>>> Ken H.
>>>>>> Americus, GA
>>>>>> '76 X-Birchaven w/Cad500/Howell EFI & EBL
>>>>>> www.gmcwipersetc.com
>>>>>> _______________________________________________
>>>>>> GMCnet mailing list
>>>>>> Unsubscribe or Change List Options:
>>>>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Take care,
>>>>> Steve
>>>>> _______________________________________________
>>>>> GMCnet mailing list
>>>>> Unsubscribe or Change List Options:
>>>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>>>
>>>
>>> --
>>> Take care,
>>> Steve
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|
Goto Forum:
Current Time: Sun Oct 06 00:23:53 CDT 2024
Total time taken to generate the page: 0.01233 seconds
|