| [GMCnet] fixed stuck transmission cable.. now no start [message #227128] |
Sat, 26 October 2013 16:46  |
Dave Motorhome
Messages: 175
Registered: July 2007
Karma:
|
Senior Member |
|
|
I had a transmission cable that would not allow me to engage s or l, so
doing research read and fixed that (thanks!) in doing so, now I can shift
to all gears, BUT the engine wont turn over.. I hear the clicks, all
electrical seems fine.. but nothing.
it started yesterday just fine. so I feel it has to be something I did
today...
which was disconnect the transmission cable on the top and bottom and use
plyers to run through the gears.
things I have done.
Battery all good. ( also tried boost)
disconnected the transmission from the cable made sure it was in neutral
tried in neutral
in searching I came across the ,ignition switch.. is that on the right
track? I read to move it up, not sure I have room to move it..
http://www.gmcmhphotos.com/photos/s-10-steering-wheel-caddy-conversion/p48874-ignition-switch.html
is it the grey or black thing,
thanks in advance,
--
David Paliotta
75 Glenbrook
Tulsa, OK
http://75glenbrook.googlepages.com/
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
