GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » got my heads back and straight edge across the springs reveal...
got my heads back and straight edge across the springs reveal... [message #226273] Sun, 20 October 2013 10:24 Go to previous message
budworks521 is currently offline  budworks521   United States
Messages: 137
Registered: October 2013
Location: Grand Rapids MI 1974 Pain...
Karma:
Senior Member
I have a question about the height of the spring assembly and if slight deviations across the top of the lifter assembly will hurt me. The heads have been passed by magna flux and the valve seats proved ok. Shall I be concerned about 1/16" or less on all the valve tops? The valve seats look equal. Thanks people!

1974 Painted Desert 455 upper half rebuild constant project inexperienced mechanic Grand Rapids Mi Always trying to learn

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Newbie questions
Next Topic: While on the Subject of Cancer
Goto Forum:
  


Current Time: Sun Oct 06 20:24:41 CDT 2024

Total time taken to generate the page: 0.20703 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software