GMCforum: GMCnet » Re: [GMCnet] Engine Noise

Home » Public Forums » GMCnet » Re: [GMCnet] Engine Noise

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Engine Noise [message #225143]

Thu, 10 October 2013 21:05

hnielsen2

Messages: 1434
Registered: February 2004
Location: Alpine CA

Karma:

Senior Member

That is why we run roller rockers.
Learned that running 455 jet boats
Howard

All is well with my Lord

> On Oct 10, 2013, at 17:52, Chris Giles <owencargeek@netscape.net> wrote:
>
>
>
> Olds v8s have a unique arrangement of rocker arms and pivots. An aluminum pivot retains each pair of rockers. If the pivot and rocker interface wears significantly you can hear a valve train tick. It is easy to pull the pivots and inspect the interface surface. Replace both rockers and pivot if there is visible wear.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

All is well with my Lord

Report message to a moderator

[Message index]

Re: [GMCnet] Engine Noise

By: hnielsen2 on Thu, 10 October 2013 21:05

Previous Topic:	Onan carb and choke...
Next Topic:	Re: [GMCnet] Questions on fuel injection replacement

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 18:13:47 CDT 2024

Total time taken to generate the page: 0.00658 seconds