GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Speedometer Head More Questions (Soldering electrical pin contacts)
Speedometer Head More Questions [message #224944] Wed, 09 October 2013 09:01 Go to previous message
gbarrow2 is currently offline  gbarrow2   United States
Messages: 765
Registered: February 2004
Location: Lake Almanor, Ca./ Red Bl...
Karma:
Senior Member
Some how during the resurrection of my 76 Eleganza all of the pin contacts became detached from the top rear of the speedo.
All of the pins are still lodged in the connector plug.

Is it possible to re-solder the pins to the speedo? If I can't do it my self where can I find a shop to make the repair.

Small appliance repair shops have gone away with the dodo bird.

Thanks for suggestions.


Gene Barrow
Lake Almanor, Ca.
1976 Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Low Fuel Light
Next Topic: Onan carb and choke...
Goto Forum:
  


Current Time: Thu Sep 19 23:03:55 CDT 2024

Total time taken to generate the page: 0.02300 seconds