| Onan Starter [message #224682] |
Sun, 06 October 2013 09:07  |
dpottebaum
Messages: 100
Registered: January 2013
Location: Bondurant, Iowa
Karma: 0
|
Senior Member |
|
|
Rookie question here:
Does the flywheel need to be removed in order to remove the starter? There does not seem to be enough bolt clearance without doing so. I need to go borrow a puller if the flywheel needs to come off....
Thanks all.
Dave Pottebaum
Bondurant, Iowa
1978 Royale
[Updated on: Sun, 06 October 2013 09:07] Report message to a moderator |
|
|
|
| Re: [GMCnet] Onan Starter [message #224688 is a reply to message #224682] |
Sun, 06 October 2013 09:57  |
powerjon
Messages: 2446
Registered: January 2004
Karma: 5
|
Senior Member |
|
|
Flywheel does not need to be removed.
JR Wright
78 Buskirk Stretch
75 Avion
Michigan
On Oct 6, 2013, at 10:07 AM, Dave Pottebaum <pottebaum5@msn.com> wrote:
>
>
> Rookie question here:
>
> Does the flywheel need to be removed in order to remove the starter? There does not see to be enough bolt clearance without doing so. I need to go borrow a puller if the flywheel needs to come off....
>
> Thanks all.
> --
> Dave Pottebaum
> Bondurant, Iowa
> 1978 Royale
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|
|
|
|
|
|
| Re: [GMCnet] Onan Starter [message #224713 is a reply to message #224693] |
Sun, 06 October 2013 14:15 |
dpottebaum
Messages: 100
Registered: January 2013
Location: Bondurant, Iowa
Karma: 0
|
Senior Member |
|
|
I should have specified, this is on a 4000W Onan, not a 6000W. The 6000 is very easy to swap out, but the 4000 looks quite a bit different. I'm back to thinking the flywheel might have to come off.
Dave Pottebaum
Bondurant, Iowa
1978 Royale
|
|
|
|
| Re: [GMCnet] Onan Starter [message #224714 is a reply to message #224713] |
Sun, 06 October 2013 14:27 |
 |
ljdavick
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
Yes, you do need to remove the flywheel. I’ve sent pages from the Onan manual via email.
Larry Davick
ljdavick@comcast.net
On Oct 6, 2013, at 12:15 PM, Dave Pottebaum wrote:
>
>
> I should have specified, this is on a 4000W Onan, not a 6000W. The 6000 is very easy to swap out, but the 4000 looks quite a bit different. I'm back to thinking the flywheel might have to come off.
> --
> Dave Pottebaum
> Bondurant, Iowa
> 1978 Royale
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
|
| Re: [GMCnet] Onan Starter [message #224716 is a reply to message #224713] |
Sun, 06 October 2013 14:36 |
emerystora
Messages: 4442
Registered: January 2004
Karma: 13
|
Senior Member |
|
|
The most common one is the 6000 watt, even in the Royale.
Yes, the 4000w would require the removal of the flywheel. Do you need copies of pages from the Onan manual?
Emery Stora
On Oct 6, 2013, at 1:15 PM, Dave Pottebaum wrote:
>
>
> I should have specified, this is on a 4000W Onan, not a 6000W. The 6000 is very easy to swap out, but the 4000 looks quite a bit different. I'm back to thinking the flywheel might have to come off.
> --
> Dave Pottebaum
> Bondurant, Iowa
> 1978 Royale
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
