GMCforum: GMCnet » need advice on 455 intake and heads gaskets

Home » Public Forums » GMCnet » need advice on 455 intake and heads gaskets

Show: Today's Messages :: Polls :: Message Navigator

need advice on 455 intake and heads gaskets [message #224588]

Fri, 04 October 2013 21:54

budworks521

Messages: 137
Registered: October 2013
Location: Grand Rapids MI 1974 Pain...

Karma:

Senior Member

Hi, I am a new gmc motor home owner. Unfortunately my rig blew head and intake manifold gaskets. Where is the best source for new gaskets, metal "turkey" tray or valley tray, and exhaust manifold gaskets. I already had one copper gasket attached to new manifold prior to the heads going. Can I reuse that copper gasket? I want to keep everything the same as it was originally built. Any input would be great. Thanks

1974 Painted Desert 455 upper half rebuild constant project inexperienced mechanic Grand Rapids Mi Always trying to learn

Report message to a moderator

[Message index]

		need advice on 455 intake and heads gaskets By: budworks521 on Fri, 04 October 2013 21:54
		Re: need advice on 455 intake and heads gaskets By: WD0AFQ on Fri, 04 October 2013 22:04
		Re: need advice on 455 intake and heads gaskets By: tphipps on Sat, 05 October 2013 07:30
		Re: need advice on 455 intake and heads gaskets By: budworks521 on Sat, 05 October 2013 10:54
		Re: need advice on 455 intake and heads gaskets By: Dennis S on Sat, 05 October 2013 11:22
		Re: need advice on 455 intake and heads gaskets By: Matt Colie on Sun, 06 October 2013 09:03
		Re: need advice on 455 intake and heads gaskets By: Ken Burton on Sun, 06 October 2013 10:06

Previous Topic:	Green and black GMC Sighting - Mukilteo Washington.
Next Topic:	Steering wheel removal

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 05:55:36 CDT 2024

Total time taken to generate the page: 0.02737 seconds