GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Engine oil cooler capacity
Engine oil cooler capacity [message #223268] Fri, 20 September 2013 22:27 Go to previous message
John Heslinga   Canada
Messages: 632
Registered: February 2011
Location: Edmonton, Alberta, Canada
Karma:
Senior Member
HI All:

http://www.gmcmhphotos.com/photos/engine-failure/p50891-engine-bearing-failure.html

I've had an engine bearing failure, (More on this later) and as part of repairing the damage I am not going to use the cooler in the radiator. I understand it is impossible to clean the cooler enough to be confidant that it will not release a pile of metal chips, filings bearing material crude. I've had conversations with Radiator repair outfits and they concure that the best solution would be to remove the tank and replace the cooler. (I know the oil from the cooler goes into the filter, However Part of the original cascading failure was plugging of the filter and bypass taking place)

BUT!! They do not know what cooler was in the radiator and could not confirm that they could get one. Hense we could take the Rad apart only to find it unrepairable.

The cost and problems dictates that I use an after-market engine cooler in front of the radiator.

I have no Idea what the BTU heat capacity of the cooler in the radiator is so having difficulty knowing what capacity The add-on cooler should be. I'm looking at a Hayden 1268 - 30,000BTU right now.

Anyone KNOW what I should get??

Best regards


John and Cathie Heslinga 1974 Canyonlands 260 455, Manny tranny and 1 ton, 3:70 LS, Red Seal Journeyman, DTE, BEd. MEd. Edmonton, Alberta
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: fuel system
Next Topic: Rear Solenoid
Goto Forum:
  


Current Time: Tue Oct 08 19:29:23 CDT 2024

Total time taken to generate the page: 0.00958 seconds