Output shaft bearing [message #218804] |
Sat, 17 August 2013 19:02 |
skip2
Messages: 544 Registered: September 2011 Location: Winter Haven,FL (center o...
Karma: 3
|
Senior Member |
|
|
Fellow cult/asylum members, does anyone have experience with replacing the bearing on the right side in the middle of the output shaft. Looks pretty straight forward in the tze manual . Just don't recall seeing it on the forum before.
Any suggestions on part number. As always, thanks.
Skip Hartline
74 Canyon Lands, FiTech,
3.7 FD LSD, Manny Tranny,
Springfield Distributor,
2001 Chevy Tracker Ragtop Towd
|
|
|
|
Re: [GMCnet] Output shaft bearing [message #218824 is a reply to message #218813] |
Sat, 17 August 2013 20:49 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
You will need to remove the bolts at the bearing cup then insert a split
bearing fixture then set it on a press and push the shaft down.
It is not a very tight fit.
Do you have to sealed bearing?
They are not the most popular one. We do keep some in stock.
Just reverse the process.
On Sat, Aug 17, 2013 at 5:45 PM, Jp Benson <chocomo99@yahoo.com> wrote:
> Check the archive.
>
>
> https://groups.google.com/forum/?fromgroups#!searchin/gmcnet-archive/RW508BR|sort:relevance/gmcnet-archive/-59RTQ0V3go/LM1oQrT_W-MJ
>
> Make sure the shaft is centered according to the manual.
>
>
>
>
> >________________________________
> > From: Skip Hartline <skiphartline@aol.com>
> >To: gmclist@temp.gmcnet.org
> >Sent: Saturday, August 17, 2013 8:02 PM
> >Subject: [GMCnet] Output shaft bearing
> >
> >
> >
> >
> >Fellow cult/asylum members, does anyone have experience with replacing
> the bearing on the right side in the middle of the output shaft. Looks
> pretty straight forward in the tze manual . Just don't recall seeing it on
> the forum before.
> >Any suggestions on part number. As always, thanks.
> >Skip Hartline
> >
> >_______________________________________________
> >GMCnet mailing list
> >Unsubscribe or Change List Options:
> >http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> >
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|