GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » SHE'S ALIVE! Bahahahahaha
SHE'S ALIVE! Bahahahahaha [message #217886] Sun, 11 August 2013 20:57 Go to previous message
kerry pinkerton is currently offline  kerry pinkerton   United States
Messages: 2565
Registered: July 2012
Location: Harvest, Al
Karma:
Senior Member
http://www.gmcmhphotos.com/photos/data/6382/m_016.jpg
http://www.gmcmhphotos.com/photos/data/6382/m_016.jpg

She's alive! Bawhahahahaha

Finally, FINALLY got everything back together. It seems like everything I touched had to be reworked, replaced, or found. (Where the hell did I put the..... you get the idea)

The tranny cooler lines were shot so new ones were made...that took a while and the new Manny Tranny had different fittings anyway that required adapters. Fortunately the local Advance Auto is only a couple miles away.

Yesterday, I primed the oil pressure with a drill, did a static timing set (Dang it's hard to see the timing marks), switched to the aux tank so the electric fuel pump would prime the carb, touched the key and VAROOM! I hadn't touched the carb during all this so it ran pretty good.

Today, I put the front wheels on, pulled the blocks out and took it for a ride (hence the previous photo Smile )

Timing is off, she coughed once and the idle is really low. I'll fix it tomorrow. I was thrilled that everything worked. I don't like making a bunch of changes at once. Makes it hard to troubleshoot things.

Some glamor shots of the engine bay. I told Ken Henderson that it made no sense to spend any time painting all the stuff that no one would or even could see but that I just couldn't help myself.

http://www.gmcmhphotos.com/photos/data/6382/m_013.jpg
http://www.gmcmhphotos.com/photos/data/6382/m_013.jpg

http://www.gmcmhphotos.com/photos/data/6382/m_014.jpg
http://www.gmcmhphotos.com/photos/data/6382/m_014.jpg

http://www.gmcmhphotos.com/photos/data/6382/m_015.jpg
http://www.gmcmhphotos.com/photos/data/6382/m_015.jpg

As they say on Duck Dynasty....Happy happy happy.

Couple other things I did was move my battery tray so I could fit the new oil cooler behind/below the right side headlight.

Basically, I unbolted the rear battery bracket, bent up a 11 gauge aluminum tray, and bolted it to the radiator frame and to the old front bracket.

http://www.gmcmhphotos.com/photos/data/6382/m_008.jpg
http://www.gmcmhphotos.com/photos/data/6382/m_008.jpg

http://www.gmcmhphotos.com/photos/data/6382/m_011.jpg
http://www.gmcmhphotos.com/photos/data/6382/m_011.jpg

In the above photo, you can see the new oil cooler, there is a 12V fan and a 180 degree switch. Here is a view of the cooler from above.

http://www.gmcmhphotos.com/photos/data/6382/m_010.jpg
http://www.gmcmhphotos.com/photos/data/6382/m_010.jpg

The only bummer is that my new braided oil cooler lines wouldn't work and I had to get some hydraulic lines made.

It took an entire freaking day to move the battery and mount the oil cooler. It didn't help that we've been in an afternoon heavy thunderstorm cycle for the past two weeks. EVERY DAY!

Anyway, a major hurdle is past. Oil pressure and vacuum is great, no noises. Happy Happy!


Kerry Pinkerton - North Alabama Had 5 over the years. Currently have a '06 Fleetwood Discovery 39L
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Drive it Broke
Next Topic: OKC Lunch Bunch
Goto Forum:
  


Current Time: Mon Nov 18 19:37:50 CST 2024

Total time taken to generate the page: 0.02192 seconds