Transmission Temp [message #217181] |
Tue, 06 August 2013 14:32 |
Glenn
Messages: 92 Registered: February 2004 Location: Northwestern Ontario
Karma: 2
|
Member |
|
|
Aynone got a base line temp for fluid as pumped out to cooler? Reason is I just did motor change and replumbed lines with 3/8" and sender in diffewrent location than before (ie used to read after cooler).Thanks in advance
HTH.........
Glenn
76 Glensbroke
|
|
|
Re: [GMCnet] Transmission Temp [message #217257 is a reply to message #217181] |
Wed, 07 August 2013 06:42 |
Steven Ferguson
Messages: 3447 Registered: May 2006
Karma: 0
|
Senior Member |
|
|
Mine was set up that way and IIRC, the output side of the pump was about 20
deg above coolant temps. On 80 deg day, flat road, 190 - 200 deg.
Steve F.
On Tue, Aug 6, 2013 at 12:32 PM, Glenn Gregory <ggregory@tbaytel.net> wrote:
>
>
> Aynone got a base line temp for fluid as pumped out to cooler? Reason is I
> just did motor change and replumbed lines with 3/8" and sender in
> diffewrent location than before (ie used to read after cooler).Thanks in
> advance
> --
> HTH.........
> Glenn
> 76 Glensbroke
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Take care,
Steve
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|