[GMCnet] Valvoline SynPower & DuraBlend Grease [message #217136] |
Tue, 06 August 2013 10:01 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma:
|
Senior Member |
|
|
G'day,
Here's the Overview of the specs of SynPower and DuraBlend as published by Valvoline:
SynPower® Synthetic Grease
Formulated to provide superior high and low temperature protection
Provides superior high- and low-temperature protection (-60°F to 425°F) over conventional greases
Exceptional • resistance to heavy loads
Moly-fortified for increased film strength
Extreme pressure fortified
Inhibits rust and oxidation
NLGI #2 GC-LB lithium complex EP grease
DuraBlend® Synthetic Blend Grease
Formulated to provide excellent high and low temperature protection
Provides excellent high- and low-temperature protection (-25°F to 400°F) over conventional greases
Exceptional • resistance to heavy loads
Moly-Fortified for increased film strength
Excellent water repellent
Inhibits rust and oxidation
Below is the Product Information as published by THE VALVOLINE COMPANY A DIVISION OF ASHLAND INC.
VALVOLINE SYNPOWER GREASE
Valvoline SynPower Grease is an excellent heavy-duty and multi-purpose automotive and industrial extreme pressure grease. It
consists of a lithium complex thickener in synthetic base oil and is fortified with molybdenum disulfide and other quality
additives. It provides protection from high loads and may be used over a wide temperature range.
Valvoline SynPower Grease is recommended for use in disc brake wheel bearings, all-purpose chassis lubrication, suspension systems,
universal joints, steering linkage, and constant velocity joint applications.
Character: Molybdenum Disulfide, Rust and Oxidation Inhibited, Extreme Pressure Fortified
Approvals/Performance Levels
NLGI GC/LB, MACK GC-G
Typical Properties
NLGI Grade: 2
Thickener Type: Lithium Complex
Color and Texture: Gray-Black / Buttery
ASTM Worked Penetration @ 77° F: 275
ASTM Dropping Pt, °F: 500 min.
ASTM D-1743 Rust Test: Pass
Weld Pt., kg: 315
Load Wear Index, kg: 60 min.
Vis @ 100°C (cSt): 12.0
Viscosity Index: 135
Pour Point °C: -20
Timken OK Load, lbs: 60 min.
VALVOLINE DURABLEND GREASE
DuraBlend Grease is a semi-synthetic lithium complex EP heavy-duty automotive grease with exceptional resistance to high
temperatures and heavy loads. It is recommended for a wide range of industrial, automotive, mining and fleet applications including
wheel bearings of disc-brake equipped vehicles and constant velocity joints.
Character: Smooth, buttery, water repellent, oxidation & rust inhibited, extreme pressure
Approvals/Performance Levels
General Motors Part No. 1051344 (which supersedes GM Part No. 1051195)
NLGI GC- LB
Typical Properties
NLGI Grade 2
Soap Base Lithium Complex
Color Blue
ASTM Worked Penetration @ 77°F 275
ASTM Dropping Point, °F 545
Kinematic Vis @ 40° C, cSt 129.5
Kinematic Vis @ 100° C, cSt 14.5
Viscosity Index 110
Pour Point °C -18
Timken OK Load, lbs min 50
As we say Downunder these two greases are near as dammit and as far as I can tell either one will work just fine to grease anything
on a GMC.
BTW Caterpillar makes a grease that is called Desert Gold that I use in Australia because neither of these two products are
available Downunder. Well at least I've never been able to find them.
I know there are other moly greases out there but they have limited distribution and therefore hard to get.
The bottom line is the MOLY!
Regards,
Rob M.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|