| OEM Wiper Motor Question [message #217101] |
Mon, 05 August 2013 23:14  |
Galen
Messages: 146
Registered: November 2011
Location: New Virginia, IA
Karma:
|
Senior Member |
|
|
I am looking for troubleshooting information on the OEM wiper system. Here's the back story. I replaced the power steering pump high pressure line due to a leak. After replacing and refilling the pump with fluid and trying to bleed by turning the wheel,it seemed like everything was ok. Then I thought about the wipers. Never had a problem before. Turned them on. Working OK. Turned them off. They stay on. Can't turn them off.
So I thought the filter might be clogged or something. Pulled the filter nipple off, and there is no screen in the nipple. So now I am looking to see what could be the problem. It's not the cable, as I can see the outside of the valve actuating, yet the wipers continue to work. If I loosen the outlet, I get fluid.
I searched the archives and can't seem to find anything about this type of problem. I know I could pursue an upgrade. I'd prefer to fix it if I can, or at least understand what is going on. Thanks in advance.
Galen
Galen Briggs
New Virginia, Iowa
1978 Palm Beach
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
