GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Bathroom fawcet
Bathroom fawcet [message #216095] Mon, 29 July 2013 11:06 Go to next message
LYNN L   United States
Messages: 140
Registered: March 2005
Location: Pearland TX.
Karma: 0
Senior Member
Does anyone have a source for a new fawcet for the sink? Jim K. no longer has any, Might have to buff the old one and rebuild it. Thanks

Lynn L 76 Eleganza Cad.500 Pearland TX.
Re: [GMCnet] Bathroom fawcet [message #216098 is a reply to message #216095] Mon, 29 July 2013 11:10 Go to previous messageGo to next message
Kathy and Fred Estabr is currently offline  Kathy and Fred Estabr   United States
Messages: 55
Registered: May 2013
Karma: 0
Member
Alex Sirum in Florida may have one give him a call.
Fred Estabrook 76 Ell, Florence AZ


On Mon, Jul 29, 2013 at 9:06 AM, LYNN LAYCOCK <lynn_sr@msn.com> wrote:

>
>
> Does anyone have a source for a new fawcet for the sink? Jim K. no
> longer has any, Might have to buff the old one and rebuild it. Thanks
> --
> Lynn L
> 76 Eleganza Cad.500
> Pearland TX.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: Bathroom fawcet [message #216100 is a reply to message #216095] Mon, 29 July 2013 11:21 Go to previous messageGo to next message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
Senior Member

LYNN L wrote on Mon, 29 July 2013 09:06

Does anyone have a source for a new fawcet for the sink? Jim K. no longer has any, Might have to buff the old one and rebuild it. Thanks



Lynn,

Your best bet is to rebuild the one you've got. I don't think you'll find a better quality bathroom faucet than the one that came on the coach, much less one with the proper shower diverter. Someone (Kerry P?) recently did a thread on this subject. Do a search and see if you can find it.


Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
Re: Bathroom fawcet [message #216104 is a reply to message #216095] Mon, 29 July 2013 11:43 Go to previous messageGo to next message
A Hamilto is currently offline  A Hamilto   United States
Messages: 4508
Registered: April 2011
Karma: 39
Senior Member
LYNN L wrote on Mon, 29 July 2013 11:06

Does anyone have a source for a new fawcet for the sink? Jim K. no longer has any, Might have to buff the old one and rebuild it. Thanks
Kerry Pinkerton's photo journal of his rebuild is here:

http://www.gmcmhphotos.com/photos/sink-diverter/p48426-sink-diverter-repair.html
Re: Bathroom fawcet [message #216120 is a reply to message #216095] Mon, 29 July 2013 13:22 Go to previous message
appie is currently offline  appie   Denmark
Messages: 902
Registered: April 2013
Location: denmark
Karma: 2
Senior Member
Just did mine
I am verry impressed by the quality of this item. No plating nothing that can wear
Just clean it up and a few new orings and it is good for a other 35 years

Just note there is no gasket under the faucet so water spild will leak down undther the barhroom floor
Together with the missing gaskets behind thr warmairoutlet and the cupboard undernearh the zink that can add up to quite som wather
I sealed them all with marine sealer


Appie eleganza 76 "Olga" now sadly sold 6 wheel discbrake Quadrabags Springfield stage 2 462 olds Manny tranny ( pictures at http://www.gmcmhphotos.com/photos/g6489-olga.html Fulltiming in Europe july 2014 til july 2016 Denmark
Previous Topic: Re: [GMCnet] Oshkosh
Next Topic: [GMCnet] exhaust gaskets?
Goto Forum:
  


Current Time: Sun Oct 06 14:17:56 CDT 2024

Total time taken to generate the page: 0.01402 seconds