GMCforum: GMCnet » Macerator

Home » Public Forums » GMCnet » Macerator (SHURflo or FLOJET ??)

Show: Today's Messages :: Polls :: Message Navigator

Macerator [message #215977]

Sun, 28 July 2013 11:33

SteveW

Messages: 538
Registered: June 2005
Location: Southern California - Ora...

Karma:

Senior Member

Greet all !!

As you'll expect from the title - I'm rigging up a macerator system using ideas from several posted solutions...

The SHURflo has a 1.5" inlet and a 1.0 outlet - need the eccentric reducer.

The FLOJET has a 3.0" inlet and a 1.5 outlet - no reducer needed...

Anyone been here before ?? What did you select and why ??

As always, THANK YOU all for the wealth of information and expertise.

Steve W
Southern California
1973 23'

Steve W 1973 : 23' Southern California

Report message to a moderator

[Message index]

		Macerator By: SteveW on Sun, 28 July 2013 11:33
		Re: Macerator By: WD0AFQ on Sun, 28 July 2013 11:48
		Re: [GMCnet] Macerator By: USAussie on Sun, 28 July 2013 12:53
		Re: Macerator By: SteveW on Sun, 28 July 2013 13:01
		Re: Macerator By: WD0AFQ on Sun, 28 July 2013 13:29
		Re: Macerator By: WD0AFQ on Sun, 28 July 2013 13:30
		Re: [GMCnet] Macerator By: USAussie on Sun, 28 July 2013 20:43
		Re: Macerator By: Dennis S on Sun, 28 July 2013 14:21
		Re: [GMCnet] Macerator By: emerystora on Sun, 28 July 2013 15:34
		Re: [GMCnet] Macerator By: Emery Stora on Sun, 28 July 2013 14:40
		Re: [GMCnet] Macerator By: jimk on Sun, 28 July 2013 17:08
		Re: Macerator By: SteveW on Sun, 28 July 2013 21:57

Previous Topic:	Olds engine oil pump views
Next Topic:	[GMCnet] R-22 roof air - its over my head...

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 09 04:30:16 CDT 2024

Total time taken to generate the page: 0.01236 seconds