GMCforum: GMCnet » ONAN Voltage Regulator

Home » Public Forums » GMCnet » ONAN Voltage Regulator

Show: Today's Messages :: Polls :: Message Navigator

ONAN Voltage Regulator [message #213511]

Sat, 06 July 2013 18:19

cbwoodsr

Messages: 1063
Registered: February 2004

Karma: 0

Senior Member

I need a PICTURE of how/where the wires hook up on it.
I have approx. 4 wires that need to be in their proper places so OhNan will work again...

cbwoodsr at swbell dot net

6000w, 77 Kingslay

Thankx

CBWood
77 Kingslay
MWC OK
ONLINE PARTS PROGRAM
www.GMCMHParts.com

Report message to a moderator

Re: [GMCnet] ONAN Voltage Regulator [message #213546 is a reply to message #213511]

Sat, 06 July 2013 20:39

powerjon

Messages: 2446
Registered: January 2004

Karma: 5

Senior Member

Charles,
Most have removed the voltage regulator as it can cause problems with the newer converter chargers.
http://www.gmcmhphotos.com/photos/misc/p38302-onan-voltage-regulator-removal.html
JR Wright
78 Buskirk Stretch
Michigan

On Jul 6, 2013, at 7:19 PM, Charles Wood <cbwoodsr@swbell.net> wrote:

>
>
> I need a PICTURE of how/where the wires hook up on it.
> I have approx. 4 wires that need to be in their proper places so OhNan will work again...
>
> cbwoodsr at swbell dot net
>
> 6000w, 77 Kingslay
>
> Thankx
> --
> CBWood
> 77 Kingslay
> MWC OK
> ONLINE PARTS PROGRAM
> http://cbwoodsr.no-ip.org/GMCParts/index.asp
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan

Report message to a moderator

Re: [GMCnet] ONAN Voltage Regulator [message #213562 is a reply to message #213546]

Sat, 06 July 2013 22:55

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

On GMC's without a separate starting battery the voltage regulator is not used and most people disconnect them. There are two wires that were hooked together and pushed on one of the regulator terminals. Those two wires must remain attached to each other if they are removed from the terminal.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Previous Topic:	[GMCnet] Waste Tank
Next Topic:	Power Steering Pulley

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 02:32:59 CST 2024

Total time taken to generate the page: 0.00793 seconds