GMCforum: GMCnet » Power Steering Pulley

Home » Public Forums » GMCnet » Power Steering Pulley

Show: Today's Messages :: Polls :: Message Navigator

Power Steering Pulley [message #213508]

Sat, 06 July 2013 17:57

Bruce Hart

Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming

Karma: 5

Senior Member

I'm in the process of cleaning up the engine compartment on my 76 Palmbeach. Engine is out and repainted, all of the attached brackets have been painted except for the power steering pump and bracket. How does one remove the pulley from the front of the power steering pump. Do I use a puller or does it thread off by using a 3/8" allen wrench of which I have dried to do.

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

Report message to a moderator

Re: Power Steering Pulley [message #213509 is a reply to message #213508]

Sat, 06 July 2013 18:05

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

You need a special power steering pulley puller. They are cheap at Harbor Freight. I have at least 2 of them around here somewhere.

http://www.harborfreight.com/pulley-remover-and-installer-set-40749.html

If you catch in on sale it is 10.99 Otherwise they are $20.00

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Re: [GMCnet] Power Steering Pulley [message #213510 is a reply to message #213509]

Sat, 06 July 2013 18:13

Bruce Hart

Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming

Karma: 5

Senior Member

Thanks Steve,
Quess I will go get one tomorrow.

On Sat, Jul 6, 2013 at 5:05 PM, Ken Burton <n9cv@comcast.net> wrote:

>
>
> You need a special power steering pulley puller. They are cheap at Harbor
> Freight. I have at least 2 of them around here somewhere.
>
> http://www.harborfreight.com/pulley-remover-and-installer-set-40749.html
>
> If you catch in on sale it is 10.99 Otherwise they are $20.00
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

Report message to a moderator

Re: [GMCnet] Power Steering Pulley [message #213574 is a reply to message #213509]

Sun, 07 July 2013 08:01

Jp Benson

Messages: 649
Registered: October 2011
Location: Fla

Karma: 2

Senior Member

That's what worked for me.� The first time removal was difficult since the pulley had been on for many years.� After installing the rebuilt pump, I realized that the return was in the wrong location. � I had to uninstall the pump and transfer the pump core to the original housing.� The second time pulley removal was a lot easier.

JP

>________________________________
> From: Ken Burton <n9cv@comcast.net>
>To: gmclist@temp.gmcnet.org
>Sent: Saturday, July 6, 2013 7:05 PM
>Subject: Re: [GMCnet] Power Steering Pulley
>
>
>
>
>You need a special power steering pulley puller.� They are cheap at Harbor Freight.� I have at least 2 of them around here somewhere.�
>
>http://www.harborfreight.com/pulley-remover-and-installer-set-40749.html
>
>If you catch in on sale it is 10.99� Otherwise they are $20.00
>--
>Ken Burton - N9KB
>76 Palm Beach
>Hebron, Indiana
>_______________________________________________
>GMCnet mailing list
>Unsubscribe or Change List Options:
>http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	ONAN Voltage Regulator
Next Topic:	Re: [GMCnet] Power Steering Pulley

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 15 23:53:03 CST 2024

Total time taken to generate the page: 0.00725 seconds