| Re: [GMCnet] Assessing a coach - purchased! Brake re-do not, enough [message #213366] |
Fri, 05 July 2013 14:16 |
KB
Messages: 1262
Registered: September 2009
Karma: 0
|
Senior Member |
|
|
We have the same year and model as your coach. To replace the
brake booster, I removed the screws along the bottom of the dash
(at the firewall) and then propped the dash out with some blocks.
I also removed the glove box (the whole thing will come out,
door and all), and I think also pulled the leveling valves
out of the way so I could reach/see through that hole.
That gave me enough access to get at the booster bolts
without cutting anything.
If you're installing a sensitized booster with the metric mounting studs,
they're a little bigger diameter than original. If you enlarge
the bolt holes through the firewall slightly, it'll be a lot
easier to get the new booster in place.
jwid,
Karen
1973 23'
1975 26'
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Karen
1975 26'
San Jose, CA
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
