GMCforum: GMCnet » Generator runs but no 120

Home » Public Forums » GMCnet » Generator runs but no 120 (Replacing the bridge rectifier on Onan Marquis 7K)

Show: Today's Messages :: Polls :: Message Navigator

Generator runs but no 120 [message #212468]

Thu, 27 June 2013 08:17

xplorid

Messages: 213
Registered: February 2012
Location: Boise

Karma:

Senior Member

Lost 120 V when the Onan stalled as I turned on AC #2. Guessing it is the bridge rectifier based on searches here. Ordered KBPC3510 and they are on their way.

Now, my GMC II has the Onan Marquis 7K, I am assuming it is the same set up as 6K, but maybe not. What I do know is that the gen is not on a slide out, it is bolted down. So, can I get to the BR from underneath? Or maybe get a jack under the Onan, unbolt and slide out? Any suggestions on the least painful way to replace a $2.57 rectifier?

Thanks.

1974/94 GMCII by Explorer Manny 6.5 TD Al radiator 1 ton front 4 bags back

Report message to a moderator

[Message index]

		Generator runs but no 120 By: xplorid on Thu, 27 June 2013 08:17
		Re: [GMCnet] Generator runs but no 120 By: jimk on Thu, 27 June 2013 10:14
		Re: [GMCnet] Generator runs but no 120 By: Ken Burton on Fri, 28 June 2013 01:36

Previous Topic:	How much ATF
Next Topic:	Dual-Fuel Generator at Costco

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Oct 04 16:21:32 CDT 2024

Total time taken to generate the page: 0.00809 seconds