Generator runs but no 120 [message #212468] |
Thu, 27 June 2013 08:17 |
xplorid
Messages: 213 Registered: February 2012 Location: Boise
Karma: 0
|
Senior Member |
|
|
Lost 120 V when the Onan stalled as I turned on AC #2. Guessing it is the bridge rectifier based on searches here. Ordered KBPC3510 and they are on their way.
Now, my GMC II has the Onan Marquis 7K, I am assuming it is the same set up as 6K, but maybe not. What I do know is that the gen is not on a slide out, it is bolted down. So, can I get to the BR from underneath? Or maybe get a jack under the Onan, unbolt and slide out? Any suggestions on the least painful way to replace a $2.57 rectifier?
Thanks.
1974/94 GMCII by Explorer
Manny 6.5 TD Al radiator
1 ton front 4 bags back
|
|
|
Re: [GMCnet] Generator runs but no 120 [message #212487 is a reply to message #212468] |
Thu, 27 June 2013 10:14 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Get me the complete model # and I will see if we can assist you.
The newer units gives out codes to let you know what is wrong,
On Thu, Jun 27, 2013 at 6:17 AM, jeff sugheir <jeff.sugheir@gmail.com>wrote:
>
>
> Lost 120 V when the Onan stalled as I turned on AC #2. Guessing it is the
> bridge rectifier based on searches here. Ordered KBPC3510 and they are on
> their way.
>
> Now, my GMC II has the Onan Marquis 7K, I am assuming it is the same set
> up as 6K, but maybe not. What I do know is that the gen is not on a slide
> out, it is bolted down. So, can I get to the BR from underneath? Or maybe
> get a jack under the Onan, unbolt and slide out? Any suggestions on the
> least painful way to replace a $2.57 rectifier?
>
> Thanks.
> --
> 1973/94 GMCII in Boise 76 455 with headers & Patterson distributor,1 ton
> front, 4 bags back, Precision Steering Gearbox
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] Generator runs but no 120 [message #212590 is a reply to message #212487] |
Fri, 28 June 2013 01:36 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
jimk wrote on Thu, 27 June 2013 10:14 | Get me the complete model # and I will see if we can assist you.
The newer units gives out codes to let you know what is wrong,
|
How is that for quick support from your GMC/Onan dealer?
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|