GMCforum: GMCnet » [GMCnet] Quad bag system

Home » Public Forums » GMCnet » [GMCnet] Quad bag system

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Quad bag system [message #211521]

Tue, 18 June 2013 13:46

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma: 11

Senior Member

I'm putting one of the systems on one of the 78 Royales now. I cut the tail pipe to give me more room for the 4 bolts that have to be removed at the frame. Helped a lot. I'll put a stainless steel band clamp on the pipe when completed. It took me about 45 minutes to remove the old parts per side. And about 30 minutes to install the new parts per side. I was impressed with the fit. And how simple it went together. Good detailed instructions. I'm using a 2 by 2 inch alum angle to mount the manifold. A lot of effort, time, and engineering went into making this kit. Nice job. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[GMCnet] Quad bag system [message #211522 is a reply to message #211521]

Tue, 18 June 2013 13:49

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma: 11

Senior Member

The system was from Jim K.

I'm putting one of the systems on one of the 78 Royales now. I cut the tail pipe to give me more room for the 4 bolts that have to be removed at the frame. Helped a lot. I'll put a stainless steel band clamp on the pipe when completed. It took me about 45 minutes to remove the old parts per side. And about 30 minutes to install the new parts per side. I was impressed with the fit. And how simple it went together. Good detailed instructions. I'm using a 2 by 2 inch alum angle to mount the manifold. A lot of effort, time, and engineering went into making this kit. Nice job. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Quad bag system [message #211564 is a reply to message #211522]

Tue, 18 June 2013 18:55

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Bob, good upgrade. Had mine 7 years and not one problem.
Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: [GMCnet] Quad bag system [message #211591 is a reply to message #211564]

Wed, 19 June 2013 01:06

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma: 9

Senior Member

Bob,
Glad you noticed the work that went into our unit.
Our unit is easier to install as it comes in 2 sections and also easy to
replace the bag when the time comes.
We have not had any problem with our units because there are hardly any
moving parts. That is why I love selling our Industrial air filters and
housings.

On Tue, Jun 18, 2013 at 4:55 PM, Dan Gregg <gregg_dan@hotmail.com> wrote:

>
>
> Bob, good upgrade. Had mine 7 years and not one problem.
> Dan
> --
> Dan & Teri Gregg
> Dexter, Mo.
>
> http://danandteri.blogspot.com/
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Previous Topic:	[GMCnet] Rear suspension air pressure
Next Topic:	Non GMC

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Oct 05 17:05:39 CDT 2024

Total time taken to generate the page: 0.01311 seconds